VFVerifiedFilters

TTI

TTI TT33-14-10B

TT33 series filter element

OEM ManufacturerAbsolute Rated
OD 3.64"L 12.93"ID 1.89"
Dimensional schematic from verified specifications

TTI TT33-14-10B specifications

The TTI TT33-14-10B is a 10µm dual phase microglass filter element. It measures 3.64" OD x 1.89" ID x 12.93" long. Filtration efficiency is rated at β11(c) ≥ 1000 per ISO 16889. Seals are Buna-N. Operating temperature: Up to 250°F. Collapse pressure rating is 435 PSID. 15 cross-references on file (13 verified, 2 transitive). Specifications verified. Last reviewed: March 2026

Physical fit

Outer Diameter (O.D.)
3.64"OEM-published
Inner Diameter (I.D.)
1.89"OEM-published
Overall Length
12.93"OEM-published
Micron Rating
10µmOEM-published
Seal Material
Buna-NOEM-published
Connection / Thread
Not yet verified from an OEM source

Performance: TTI published values

These are TTI's own published numbers. Performance specs differ by brand and are never inherited across cross-references.

Beta Ratio (ISO 16889)
β11(c) ≥ 1000OEM-published
Media Type
Dual Phase Microglass
Collapse Rating
435 PSIDOEM-published
Max Operating Pressure
3000 psi (207 bar)Decoded from part number
Operating Temperature
Up to 250°FOEM-published
Series
TT33

Additional

Filter Type
Cartridge Element
Element Length
12.93" (328 mm)
O.D.
3.64"
I.D.
1.89"

About the TTI TT33-14-10B

TTI TT33-14-10B is a filter element rated at 10 µm (10 µm nominal), a beta ratio of β ≥ 1000, 435 psid collapse pressure, and measuring 3.64 in OD, 1.89 in ID, and 12.93 in length. It uses Dual Phase Microglass media and Buna-N seals, rated for 250 °F maximum (TTI Elements Catalog 08May24.pdf, p.33).

What replaces the TTI TT33-14-10B?

15 cross-references on file (13 verified, 2 transitive). Select to expand.

A cross-reference confirms dimensional fit and micron rating, not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.

Cross-references on file

Each row carries its own evidence status. Verified: confirmed against a source document. Sourced: taken from a published cross list, not independently confirmed. Transitive: derived through a chain of published crosses. None is an application-compatibility approval.

Part NumberManufacturerMatch
HP33DNL14-12MBHy-ProTransitive
SF330DN-13-12UMSwift FiltersTransitive
HP33DNL1412MBHy-ProVerified
P170612DonaldsonVerified
400HL660H10LL-LAEPEVerified
R660-H-BH10AFairey ArlonVerified
FC7273F010BSFinnVerified
FFKPVL1727310ABSFinnVerified
0660D010BN3HCHydacVerified
0660D010BNHCHydacVerified
020660D10VG3InternormenVerified
MP9706MP FiltriVerified
HC2233FDS13HPallVerified
HC2233FKS13HPallVerified
HC2233FUS13HPallVerified
Get a quote on any of these →

Application & Compatibility

The TTI TT33-14-10B is designed for use in hydraulic and lubrication filtration systems. With a 10µm rating, this element is suitable for proportional valve protection and general hydraulic systems. Buna-N seals provide compatibility with standard petroleum-based fluids and mineral oils.

The 435 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.

Frequently Asked Questions

What micron rating is the TTI TT33-14-10B?

The TTI TT33-14-10B has a 10µm micron rating with dual phase microglass filter media, rated at β11(c) ≥ 1000 per ISO 16889.

What are the dimensions of the TTI TT33-14-10B?

The TTI TT33-14-10B measures 3.64" OD, 1.89" ID, 12.93" overall length.

What seal material does the TTI TT33-14-10B use?

The TTI TT33-14-10B uses Buna-N seals.

Is there a cross-reference for the TTI TT33-14-10B?

Yes. 15 cross-references on file (13 verified, 2 transitive) for the TTI TT33-14-10B from manufacturers including Hy-Pro, Swift Filters, Donaldson, EPE. A cross-reference is a fit-and-rating claim, not a performance or application approval. Contact VerifiedFilters for specific part numbers and availability.

What is the collapse pressure rating of the TTI TT33-14-10B?

The TTI TT33-14-10B has a collapse pressure rating of 435 PSID. This indicates the maximum differential pressure the element can withstand without structural failure.

What is the operating temperature range for the TTI TT33-14-10B?

The TTI TT33-14-10B is rated for Up to 250°F.

How this entry is verified

Every specification on this page names its source: manufacturer documents first, distributor catalogs second, decoded part-number patterns labeled as such. When a value has not been verified from an OEM source, the cell says so. Cross-references are fit claims, never performance claims.

Our verification standards →

Request a quote for the TTI TT33-14-10B

Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.

Add your number and we'll call you back within the hour with pricing.

Labeled Cross-References

Every cross-reference on file carries its evidence status: verified, sourced, or transitive

Fast Response

Quotes and answers within 24 hours

Expert Support

Real filtration specialists, not call centers