Parker
Parker WPF210QEVM2KS121
Industrial filter element
Parker WPF210QEVM2KS121 specifications
The Parker WPF210QEVM2KS121 is a 10µm microglass filter element. Filtration efficiency is rated at β ≥ 1000 at rated micron (test standard not recorded). Seals are Viton (FKM). Collapse pressure rating is 50 PSID. 1 cross-reference on file (1 sourced).
Physical fit
- Outer Diameter (O.D.)
- Not yet verified from an OEM source
- Inner Diameter (I.D.)
- Not yet verified from an OEM source
- Overall Length
- Not yet verified from an OEM source
- Micron Rating
- 10µmSource under review
- Seal Material
- Viton (FKM)FluorocarbonSource under review
- Connection / Thread
- SAE-12Source under review
Performance: Parker published values
These are Parker's own published numbers. Performance specs differ by brand and are never inherited across cross-references.
- Beta Ratio (test standard not recorded)
- β ≥ 1000 at rated micronSource under review
- Media Type
- Microglass10Q microglass
- Collapse Rating
- 50 PSIDSource under review
- Flow Rate
- 25 GPMSource under review
About the Parker WPF210QEVM2KS121
Parker WPF210QEVM2KS121 -- Hydraulic filtration system, 10um, Microglass, 25.0 GPM, SAE-12, Viton (FKM) seals
What replaces the Parker WPF210QEVM2KS121?
1 cross-reference on file (1 sourced). Select to expand.
What replaces the Parker WPF210QEVM2KS121?
1 cross-reference on file (1 sourced). Select to expand.
A cross-reference confirms dimensional fit and micron rating, not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.
Cross-references on file
Each row carries its own evidence status. Verified: confirmed against a source document. Sourced: taken from a published cross list, not independently confirmed. Transitive: derived through a chain of published crosses. None is an application-compatibility approval.
| Part Number | Manufacturer | Match |
|---|---|---|
| 28-6687 | FilterMart | Sourced |
Application & Compatibility
The PARKER WPF210QEVM2KS121 is designed for use in hydraulic and lubrication filtration systems. With a 10µm rating, this element is suitable for proportional valve protection and general hydraulic systems. Viton (FKM) seals provide compatibility with petroleum-based fluids, synthetic fluids, phosphate esters, and water-glycol mixtures.
The 50 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.
Frequently Asked Questions
What micron rating is the Parker WPF210QEVM2KS121?
What seal material does the Parker WPF210QEVM2KS121 use?
Is there a cross-reference for the Parker WPF210QEVM2KS121?
What is the collapse pressure rating of the Parker WPF210QEVM2KS121?
How this entry is verified
Every specification on this page names its source: manufacturer documents first, distributor catalogs second, decoded part-number patterns labeled as such. When a value has not been verified from an OEM source, the cell says so. Cross-references are fit claims, never performance claims.
Request a quote for the Parker WPF210QEVM2KS121
Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.
Labeled Cross-References
Every cross-reference on file carries its evidence status: verified, sourced, or transitive
Fast Response
Quotes and answers within 24 hours
Expert Support
Real filtration specialists, not call centers