Parker
Parker G01441Q
Industrial filter element
Parker G01441Q specifications
The Parker G01441Q is a 10µm high strength microglass filter element. Filtration efficiency is rated at β ≥ 1000 at rated micron (test standard not recorded). Seals are Buna-N (NBR). Collapse pressure rating is 3000 PSID. 2 cross-references on file (1 verified, 1 sourced).
Physical fit
- Outer Diameter (O.D.)
- Not yet verified from an OEM source
- Inner Diameter (I.D.)
- Not yet verified from an OEM source
- Overall Length
- Not yet verified from an OEM source
- Micron Rating
- 10µmSource under review
- Seal Material
- Buna-N (NBR)NitrileSource under review
- Connection / Thread
- Not yet verified from an OEM source
Performance: Parker published values
These are Parker's own published numbers. Performance specs differ by brand and are never inherited across cross-references.
- Beta Ratio (test standard not recorded)
- β ≥ 1000 at rated micronSource under review
- Media Type
- High Strength Microglass10QH High Strength Microglass
- Collapse Rating
- 3000 PSIDSource under review
About the Parker G01441Q
Parker G01441Q -- Replacement hydraulic filter element, 10um, High Strength Microglass, Buna-N (NBR) seals, for 22PD Housing
What replaces the Parker G01441Q?
2 cross-references on file (1 verified, 1 sourced). Select to expand.
What replaces the Parker G01441Q?
2 cross-references on file (1 verified, 1 sourced). Select to expand.
A cross-reference confirms dimensional fit and micron rating, not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.
Cross-references on file
Each row carries its own evidence status. Verified: confirmed against a source document. Sourced: taken from a published cross list, not independently confirmed. Transitive: derived through a chain of published crosses. None is an application-compatibility approval.
| Part Number | Manufacturer | Match |
|---|---|---|
| HP266HL5-10MB | Hy-Pro | Verified |
| SF01441-10UM | Swift Filters | Sourced |
Application & Compatibility
The PARKER G01441Q is designed for use in hydraulic and lubrication filtration systems. With a 10µm rating, this element is suitable for proportional valve protection and general hydraulic systems. Buna-N (NBR) seals provide compatibility with standard petroleum-based fluids and mineral oils.
The 3000 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.
Frequently Asked Questions
What micron rating is the Parker G01441Q?
What seal material does the Parker G01441Q use?
Is there a cross-reference for the Parker G01441Q?
What is the collapse pressure rating of the Parker G01441Q?
How this entry is verified
Every specification on this page names its source: manufacturer documents first, distributor catalogs second, decoded part-number patterns labeled as such. When a value has not been verified from an OEM source, the cell says so. Cross-references are fit claims, never performance claims.
Request a quote for the Parker G01441Q
Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.
Labeled Cross-References
Every cross-reference on file carries its evidence status: verified, sourced, or transitive
Fast Response
Quotes and answers within 24 hours
Expert Support
Real filtration specialists, not call centers