Hydac
The Hydac 0160D149WHC-V is a 149µm stainless steel wire mesh hydraulic filter element. It measures 2.37" OD x 5.1" long. Seals are Fluorocarbon (Viton/FKM), rated for -4°F to 400°F. Collapse pressure rating is 2175 PSID. 1 verified cross-reference is available from aftermarket manufacturers.
Need the Exact OEM Part?
We can source and ship Hydac filters directly.
Want a Verified Alternative?
Get an equivalent filter with the same specs at a better price.
Technical specifications for the Hydac 0160D149WHC-V filter element. Data sourced from manufacturer catalogs and verified against OEM documentation.
| Specification | Value |
|---|---|
| Micron Rating | 149µm |
| Media Type | Stainless Steel Wire Mesh |
| O.D. (inches) | 2.37" |
| O.A.L. (inches) | 5.1" |
| Collapse Rating | 2175 PSID |
| Seal Material | Fluorocarbon (Viton/FKM) |
| Flow Direction | Pressure Line (Outside-In) |
| Operating Temperature | -4°F to 400°F |
Last verified: February 2026
1 verified cross-reference available from Hy-Pro. All cross-references are reviewed for dimensional and performance compatibility.
| Manufacturer | Part Number | Confidence |
|---|---|---|
| Hy-Pro | Request part number | Verified |
Get specific part numbers for all 1 aftermarket cross-reference
Free cross-reference report. Usually within 24 hours.
Last verified: February 2026
The HYDAC 0160D149WHC-V is designed for use in hydraulic and lubrication filtration systems. With a 149µm rating, this element is suitable for pump and component protection in industrial hydraulic circuits. Fluorocarbon (Viton/FKM) seals provide compatibility with petroleum-based fluids, synthetic fluids, phosphate esters, and water-glycol mixtures.
The 2175 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.
250,000+ verified filter specifications
Quotes and answers within 24 hours
Real filtration specialists, not call centers