Hy-Pro
The Hy-Pro HPNSXL10-12MV is a 12µm dualglass hydraulic filter element. It measures 1.741" OD x 1.735" ID x 8.03" long. Filtration efficiency is rated at β4000 per ISO 16889. Seals are Fluorocarbon (Viton), rated for -20°F to 250°F. Collapse pressure rating is 3000 PSID. 3 verified cross-references are available from aftermarket manufacturers.
Request a Quote
Request a quote for this filter element.
3 Cross-References Available
See which OEM filters this product replaces.
Technical specifications for the Hy-Pro HPNSXL10-12MV filter element. Data sourced from manufacturer catalogs and verified against OEM documentation.
| Specification | Value |
|---|---|
| Performance | |
| Micron Rating | 12µm |
| Media Type | Dualglass |
| Efficiency (ISO 16889) | β4000 |
| Collapse Rating | 3000 PSID |
| Operating Temperature | -20°F to 250°F |
| Dimensions | |
| O.D. (inches) | 1.741" |
| I.D. (inches) | 1.735" |
| O.A.L. (inches) | 8.03" |
| Seal Material | Fluorocarbon (Viton) |
Last verified: February 2026
3 verified replacements available from Schroeder, Swift Filters
All cross-references are reviewed for dimensional and performance compatibility. Enter your info below to receive the full cross-reference report.
The HY-PRO HPNSXL10-12MV is designed for use in hydraulic and lubrication filtration systems. With a 12µm rating, this element is suitable for proportional valve protection and general hydraulic systems. Fluorocarbon (Viton) seals provide compatibility with petroleum-based fluids, synthetic fluids, phosphate esters, and water-glycol mixtures.
The 3000 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.
We have 3 verified replacements on file. Enter your info and we'll send you the full cross-reference report within 24 hours.
352,000+ verified filter specifications
Quotes and answers within 24 hours
Real filtration specialists, not call centers