Hy-Pro
Hy-Pro HPKSXL8-12MV
HPKSXL series filter element
Hy-Pro HPKSXL8-12MV specifications
The Hy-Pro HPKSXL8-12MV is a 12µm dualglass filter element. Filtration efficiency is rated at β4000 per ISO 16889. Seals are Fluorocarbon (Viton), rated for -20°F to 250°F. Collapse pressure rating is 3000 PSID. 7 verified cross-references are available from aftermarket manufacturers.
Physical fit
- Outer Diameter (O.D.)
- Not yet verified from an OEM source
- Inner Diameter (I.D.)
- Not yet verified from an OEM source
- Overall Length
- Not yet verified from an OEM source
- Micron Rating
- 12µmSource under review
- Seal Material
- Fluorocarbon (Viton)Source under review
- Connection / Thread
- Not yet verified from an OEM source
Performance: Hy-Pro published values
These are Hy-Pro's own published numbers. Performance specs differ by brand and are never inherited across cross-references.
- Efficiency (ISO 16889)
- β4000
- Efficiency
- 99.97%
- Media Type
- DualglassG8 High-performance glass fiber media
- Collapse Rating
- 3000 PSID
- Max Operating Pressure
- 100 psi (6.9 bar)
- Operating Temperature
- -20°F to 250°F
- Series
- HPKSXL
Additional
- Filter Type
- In-Tank Element
- Element Length
- 8" (203 mm)
- Beta Ratio
- β5[C] ≥ 4000
- Max Temperature
- 225°F (107°C)
About the Hy-Pro HPKSXL8-12MV
Hy-Pro HPKSXL8-12MV is a filter element rated at 12 µm (12 µm nominal), a beta ratio of β ≥ 4000, 3000 psid collapse pressure, and measuring 3.115 in OD, 1.64 in ID, and 9.2 in length. It uses Dualglass media and Fluorocarbon (Viton) seals, rated for -20 °F to 250 °F (Hy-Pro HPKSXL-P.pdf).
What replaces the Hy-Pro HPKSXL8-12MV?
7 published cross-references on file. Select to expand.
What replaces the Hy-Pro HPKSXL8-12MV?
7 published cross-references on file. Select to expand.
A cross-reference confirms dimensional fit and micron rating, not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.
Published cross-references
| Part Number | Manufacturer | Match |
|---|---|---|
| SFKSX-9-12UMV | Swift Filters | Sourced |
| MP4414 | MP Filtri | Verified |
| KSX7-V | Schroeder | Verified |
| HC9711FDS9Z | Pall | Verified |
| HC9711FDT9Z | Pall | Verified |
| HC9711FCS9Z | Pall | Verified |
| HC9711FRS9Z | Pall | Verified |
Application & Compatibility
The HY-PRO HPKSXL8-12MV is designed for use in hydraulic and lubrication filtration systems. With a 12µm rating, this element is suitable for proportional valve protection and general hydraulic systems. Fluorocarbon (Viton) seals provide compatibility with petroleum-based fluids, synthetic fluids, phosphate esters, and water-glycol mixtures.
The 3000 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.
Frequently Asked Questions
What micron rating is the Hy-Pro HPKSXL8-12MV?
What seal material does the Hy-Pro HPKSXL8-12MV use?
Is there a cross-reference for the Hy-Pro HPKSXL8-12MV?
What is the collapse pressure rating of the Hy-Pro HPKSXL8-12MV?
What is the operating temperature range for the Hy-Pro HPKSXL8-12MV?
How this entry is verified
Every specification on this page names its source: manufacturer documents first, distributor catalogs second, decoded part-number patterns labeled as such. When a value has not been verified from an OEM source, the cell says so. Cross-references are fit claims, never performance claims.
Request a quote for the Hy-Pro HPKSXL8-12MV
Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.
Verified Cross-References
520,000+ verified cross-references on file
Fast Response
Quotes and answers within 24 hours
Expert Support
Real filtration specialists, not call centers