Hy-Pro
Hy-Pro HPK5L9-10WB-WS
HPK series filter element
Hy-Pro HPK5L9-10WB-WS specifications
The Hy-Pro HPK5L9-10WB-WS is a 10µm ss wire mesh filter element. Filtration efficiency is rated at β200 per ISO 16889. Seals are Nitrile (Buna-N), rated for -45°F to 225°F. Collapse pressure rating is 5000 PSID. 1 verified cross-reference is available from aftermarket manufacturers.
Physical fit
- Outer Diameter (O.D.)
- Not yet verified from an OEM source
- Inner Diameter (I.D.)
- Not yet verified from an OEM source
- Overall Length
- Not yet verified from an OEM source
- Micron Rating
- 10µmDecoded from part number
- Seal Material
- Nitrile (Buna-N)Decoded from part number
- Connection / Thread
- Not yet verified from an OEM source
Performance: Hy-Pro published values
These are Hy-Pro's own published numbers. Performance specs differ by brand and are never inherited across cross-references.
- Efficiency (ISO 16889)
- β200
- Media Type
- SS Wire MeshStainless steel wire mesh
- Collapse Rating
- 5000 PSID
- Max Operating Pressure
- 100 psi (6.9 bar)
- Operating Temperature
- -45°F to 225°F
- Series
- HPK
Additional
- Filter Type
- In-Tank Element
- Element Length
- 9" (229 mm)
- Beta Ratio
- Nominal
- Max Temperature
- 225°F (107°C)
About the Hy-Pro HPK5L9-10WB-WS
Hy-Pro HPK5L9-10WB-WS is a filter element rated at 10 µm (10 µm nominal), a beta ratio of β ≥ 200, 5000 psid collapse pressure, and measuring 3.84 in OD, 1.65 in ID, and 9.2 in length. It uses SS Wire Mesh media and Nitrile (Buna-N) seals, rated for -45 °F to 225 °F (Hy-Pro HPK5L-P.pdf).
What replaces the Hy-Pro HPK5L9-10WB-WS?
1 published cross-reference on file. Select to expand.
What replaces the Hy-Pro HPK5L9-10WB-WS?
1 published cross-reference on file. Select to expand.
A cross-reference confirms dimensional fit and micron rating, not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.
Published cross-references
| Part Number | Manufacturer | Match |
|---|---|---|
| 06-1941 | FilterMart | Sourced |
Application & Compatibility
The HY-PRO HPK5L9-10WB-WS is designed for use in hydraulic and lubrication filtration systems. With a 10µm rating, this element is suitable for proportional valve protection and general hydraulic systems. Nitrile (Buna-N) seals provide compatibility with standard petroleum-based fluids and mineral oils.
The 5000 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.
Frequently Asked Questions
What micron rating is the Hy-Pro HPK5L9-10WB-WS?
What seal material does the Hy-Pro HPK5L9-10WB-WS use?
Is there a cross-reference for the Hy-Pro HPK5L9-10WB-WS?
What is the collapse pressure rating of the Hy-Pro HPK5L9-10WB-WS?
What is the operating temperature range for the Hy-Pro HPK5L9-10WB-WS?
How this entry is verified
Every specification on this page names its source: manufacturer documents first, distributor catalogs second, decoded part-number patterns labeled as such. When a value has not been verified from an OEM source, the cell says so. Cross-references are fit claims, never performance claims.
Request a quote for the Hy-Pro HPK5L9-10WB-WS
Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.
Verified Cross-References
520,000+ verified cross-references on file
Fast Response
Quotes and answers within 24 hours
Expert Support
Real filtration specialists, not call centers