Hy-Pro

Hy-Pro HP96NL13-10WB

Verified SourceAbsolute Rated

Dimensional schematic

Micron: 10µm
Media: SS Wire Mesh
O.D.: 3.98"
I.D.: 2.376"
Length: 12.77"
Seal: Nitrile (Buna-N)
Efficiency: β200
Collapse: 450 PSID

Hy-Pro HP96NL13-10WB is a filter element rated at 10 µm (10 µm nominal), a beta ratio of β ≥ 200, 450 psid collapse pressure, and measuring 3.98 in OD, 2.376 in ID, and 12.77 in length. It uses SS Wire Mesh media and Nitrile (Buna-N) seals, rated for -45 °F to 225 °F (Hy-Pro HP96NL-P.pdf).

Request a quote

Pricing and availability within 24 hours.

Mon–Fri, 8am–5pm MT

1 verified cross-reference — see what replaces this →

Part Number: HP96NL13-10WB
Manufacturer: Hy-Pro

Hy-Pro HP96NL13-10WB specifications

The Hy-Pro HP96NL13-10WB is a 10µm ss wire mesh filter element. It measures 3.98" OD x 2.376" ID x 12.77" long. Filtration efficiency is rated at β200 per ISO 16889. Seals are Nitrile (Buna-N), rated for -45°F to 225°F. Collapse pressure rating is 450 PSID. 1 verified cross-reference is available from aftermarket manufacturers. Specifications verified. Last reviewed: May 2026

Performance

Micron Rating: 10µm
Media Type: SS Wire MeshStainless steel wire mesh
Efficiency (ISO 16889): β200
Collapse Rating: 450 PSID
Operating Temperature: -45°F to 225°F
Series: HP96NL

Dimensions

O.D. (inches): 3.98"
I.D. (inches): 2.376"
O.A.L. (inches): 12.77"
Seal Material: Nitrile (Buna-N)

What replaces the Hy-Pro HP96NL13-10WB?

1 verified cross-reference on file. A cross-reference confirms dimensional fit and micron rating — not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.

Part Number	Manufacturer	Match
SS250B10B	Stauff	Verified

Get a quote on any of these →

Application & Compatibility

The HY-PRO HP96NL13-10WB is designed for use in hydraulic and lubrication filtration systems. With a 10µm rating, this element is suitable for proportional valve protection and general hydraulic systems. Nitrile (Buna-N) seals provide compatibility with standard petroleum-based fluids and mineral oils.

The 450 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.

Frequently Asked Questions

What micron rating is the Hy-Pro HP96NL13-10WB?

The Hy-Pro HP96NL13-10WB has a 10µm micron rating with ss wire mesh filter media, rated at β200 per ISO 16889.

What are the dimensions of the Hy-Pro HP96NL13-10WB?

The Hy-Pro HP96NL13-10WB measures 3.98" OD, 2.376" ID, 12.77" overall length.

What seal material does the Hy-Pro HP96NL13-10WB use?

The Hy-Pro HP96NL13-10WB uses Nitrile (Buna-N) seals, rated for -45°F to 225°F.

Is there a cross-reference for the Hy-Pro HP96NL13-10WB?

Yes. There is 1 verified cross-reference for the Hy-Pro HP96NL13-10WB from manufacturers including Stauff. Contact VerifiedFilters for specific part numbers and availability.

What is the collapse pressure rating of the Hy-Pro HP96NL13-10WB?

The Hy-Pro HP96NL13-10WB has a collapse pressure rating of 450 PSID. This indicates the maximum differential pressure the element can withstand without structural failure.

What is the operating temperature range for the Hy-Pro HP96NL13-10WB?

The Hy-Pro HP96NL13-10WB is rated for -45°F to 225°F, determined by its Nitrile (Buna-N) seals.

Request a quote for the Hy-Pro HP96NL13-10WB

Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.

Verified Cross-References

520,000+ verified cross-references on file

Fast Response

Quotes and answers within 24 hours

Expert Support

Real filtration specialists, not call centers