Hy-Pro

Hy-Pro HP95RNL14-100WSV

Verified SourceAbsolute Rated

Dimensional schematic

Micron: 100µm
Media: Stainless Steel Wire Mesh
O.D.: 6.764"
I.D.: 3.783"
Length: 14.16"
Seal: Viton
Efficiency: β200
Collapse: 150 PSID

Hy-Pro HP95RNL14-100WSV is a filter element rated at 100 µm (100 µm nominal), a beta ratio of β ≥ 200, 150 psid collapse pressure, and measuring 6.764 in OD, 3.783 in ID, and 14.16 in length. It uses Stainless Steel Wire Mesh media and Viton seals (Hy-Pro 14G-049 drawing).

Request a quote

Pricing and availability within 24 hours.

Mon–Fri, 8am–5pm MT

1 verified cross-reference — see what replaces this →

Part Number: HP95RNL14-100WSV
Manufacturer: Hy-Pro

Hy-Pro HP95RNL14-100WSV specifications

The Hy-Pro HP95RNL14-100WSV is a 100µm stainless steel wire mesh filter element. It measures 6.764" OD x 3.783" ID x 14.16" long. Filtration efficiency is rated at β200 per ISO 16889. Seals are Viton. Collapse pressure rating is 150 PSID. 1 verified cross-reference is available from aftermarket manufacturers. Specifications verified. Last reviewed: May 2026

Performance

Media Type: Stainless Steel Wire Mesh
Efficiency (ISO 16889): β200
Collapse Rating: 150 PSID
Micron Rating: 100µm
Series: HP95RNL

Dimensions

O.D. (inches): 6.764"
I.D. (inches): 3.783"
O.A.L. (inches): 14.16"
Seal Material: Viton

What replaces the Hy-Pro HP95RNL14-100WSV?

1 verified cross-reference on file. A cross-reference confirms dimensional fit and micron rating — not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.

Part Number	Manufacturer	Match
RE250B100V	Stauff	Verified

Get a quote on any of these →

Application & Compatibility

The HY-PRO HP95RNL14-100WSV is designed for use in hydraulic and lubrication filtration systems. With a 100µm rating, this element is suitable for pump and component protection in industrial hydraulic circuits. Viton seals provide compatibility with petroleum-based fluids, synthetic fluids, phosphate esters, and water-glycol mixtures.

The 150 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.

Frequently Asked Questions

What micron rating is the Hy-Pro HP95RNL14-100WSV?

The Hy-Pro HP95RNL14-100WSV has a 100µm micron rating with stainless steel wire mesh filter media, rated at β200 per ISO 16889.

What are the dimensions of the Hy-Pro HP95RNL14-100WSV?

The Hy-Pro HP95RNL14-100WSV measures 6.764" OD, 3.783" ID, 14.16" overall length.

What seal material does the Hy-Pro HP95RNL14-100WSV use?

The Hy-Pro HP95RNL14-100WSV uses Viton seals.

Is there a cross-reference for the Hy-Pro HP95RNL14-100WSV?

Yes. There is 1 verified cross-reference for the Hy-Pro HP95RNL14-100WSV from manufacturers including Stauff. Contact VerifiedFilters for specific part numbers and availability.

What is the collapse pressure rating of the Hy-Pro HP95RNL14-100WSV?

The Hy-Pro HP95RNL14-100WSV has a collapse pressure rating of 150 PSID. This indicates the maximum differential pressure the element can withstand without structural failure.

Request a quote for the Hy-Pro HP95RNL14-100WSV

Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.

Verified Cross-References

520,000+ verified cross-references on file

Fast Response

Quotes and answers within 24 hours

Expert Support

Real filtration specialists, not call centers