Hy-Pro

Hy-Pro HP94L13-100WB

Verified SourceAbsolute Rated

Dimensional schematic

Micron: 100µm
Media: Stainless Steel Wire Mesh
O.D.: 3.779"
I.D.: 2.225"
Length: 13.14"
Seal: Nitrile (Buna-N)
Efficiency: β200
Collapse: 290 PSID

Hy-Pro HP94L13-100WB is a filter element rated at 100 µm (100 µm nominal), a beta ratio of β ≥ 200, 290 psid collapse pressure, and measuring 3.779 in OD, 2.225 in ID, and 13.14 in length. It uses Stainless Steel Wire Mesh media and Nitrile (Buna-N) seals, rated for -45 °F to 225 °F (Hy-Pro part number decoder).

Request a quote

Pricing and availability within 24 hours.

Mon–Fri, 8am–5pm MT

1 verified cross-reference — see what replaces this →

Part Number: HP94L13-100WB
Manufacturer: Hy-Pro

Hy-Pro HP94L13-100WB specifications

The Hy-Pro HP94L13-100WB is a 100µm stainless steel wire mesh filter element. It measures 3.779" OD x 2.225" ID x 13.14" long. Filtration efficiency is rated at β200 per ISO 16889. Seals are Nitrile (Buna-N), rated for -45°F to 225°F. Collapse pressure rating is 290 PSID. 1 verified cross-reference is available from aftermarket manufacturers. Specifications verified. Last reviewed: May 2026

Performance

Media Type: Stainless Steel Wire Mesh
Efficiency (ISO 16889): β200
Micron Rating: 100µm
Collapse Rating: 290 PSID
Operating Temperature: -45°F to 225°F
Series: HP94L

Dimensions

O.D. (inches): 3.779"
I.D. (inches): 2.225"
O.A.L. (inches): 13.14"
Seal Material: Nitrile (Buna-N)

What replaces the Hy-Pro HP94L13-100WB?

1 verified cross-reference on file. A cross-reference confirms dimensional fit and micron rating — not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.

Part Number	Manufacturer	Match
06-1930	FilterMart	Sourced

Get a quote on any of these →

Application & Compatibility

The HY-PRO HP94L13-100WB is designed for use in hydraulic and lubrication filtration systems. With a 100µm rating, this element is suitable for pump and component protection in industrial hydraulic circuits. Nitrile (Buna-N) seals provide compatibility with standard petroleum-based fluids and mineral oils.

The 290 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.

Frequently Asked Questions

What micron rating is the Hy-Pro HP94L13-100WB?

The Hy-Pro HP94L13-100WB has a 100µm micron rating with stainless steel wire mesh filter media, rated at β200 per ISO 16889.

What are the dimensions of the Hy-Pro HP94L13-100WB?

The Hy-Pro HP94L13-100WB measures 3.779" OD, 2.225" ID, 13.14" overall length.

What seal material does the Hy-Pro HP94L13-100WB use?

The Hy-Pro HP94L13-100WB uses Nitrile (Buna-N) seals, rated for -45°F to 225°F.

Is there a cross-reference for the Hy-Pro HP94L13-100WB?

Yes. There is 1 verified cross-reference for the Hy-Pro HP94L13-100WB from manufacturers including FilterMart. Contact VerifiedFilters for specific part numbers and availability.

What is the collapse pressure rating of the Hy-Pro HP94L13-100WB?

The Hy-Pro HP94L13-100WB has a collapse pressure rating of 290 PSID. This indicates the maximum differential pressure the element can withstand without structural failure.

What is the operating temperature range for the Hy-Pro HP94L13-100WB?

The Hy-Pro HP94L13-100WB is rated for -45°F to 225°F, determined by its Nitrile (Buna-N) seals.

Request a quote for the Hy-Pro HP94L13-100WB

Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.

Verified Cross-References

520,000+ verified cross-references on file

Fast Response

Quotes and answers within 24 hours

Expert Support

Real filtration specialists, not call centers