Hy-Pro
Hy-Pro HP913NSL39-10MB
- Micron
- 10µm
- Media
- G8 Dualglass
- O.D.
- 4.975"
- I.D.
- 3.384"
- Length
- 39.57"
- Seal
- Nitrile (Buna-N)
- Efficiency
- β11 ≥ 4000
- Collapse
- 250 PSID
Hy-Pro HP913NSL39-10MB is a filter element rated at 10 µm (10 µm nominal), a beta ratio of β ≥ 11, 250 psid collapse pressure, and measuring 4.975 in OD, 3.384 in ID, and 39.57 in length. It uses G8 Dualglass media and Nitrile (Buna-N) seals, rated for -45 °F to 225 °F (Donaldson Hy-Pro HP101 Data Sheet FE-101-071724, p.4).
Request a quote
Pricing and availability within 24 hours.
Get a quote →Or call (385) 202-5628Mon–Fri, 8am–5pm MT
20 verified cross-references — see what replaces this →- Part Number
- HP913NSL39-10MB
- Manufacturer
- Hy-Pro
Hy-Pro HP913NSL39-10MB specifications
The Hy-Pro HP913NSL39-10MB is a 10µm g8 dualglass filter element. It measures 4.975" OD x 3.384" ID x 39.57" long. Filtration efficiency is rated at β11 ≥ 4000 per ISO 16889. Seals are Nitrile (Buna-N), rated for -45°F to 225°F. Collapse pressure rating is 250 PSID. 20 verified cross-references are available from aftermarket manufacturers. Specifications verified. Last reviewed: March 2026
Performance
- Micron Rating
- 10µm
- Media Type
- G8 Dualglass
- Efficiency (ISO 16889)
- β11 ≥ 4000
- Collapse Rating
- 250 PSID
- Efficiency
- 99.97%
- Operating Temperature
- -45°F to 225°F
- Series
- HP913NS
Dimensions
- O.D. (inches)
- 4.975"
- O.A.L. (inches)
- 39.57"
- I.D. (inches)
- 3.384"
- Seal Material
- Nitrile (Buna-N)Nitrile (Buna)
What replaces the Hy-Pro HP913NSL39-10MB?
20 verified cross-references on file. A cross-reference confirms dimensional fit and micron rating — not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.
| Part Number | Manufacturer | Match |
|---|---|---|
| ECR-S-913-A-CC10 | Indufil | Verified |
| ECR-S-913-A-GF10 | Indufil | Verified |
| ECR-S-913-A-PX10 | Indufil | Verified |
| ECR-S-913-PX10 | Indufil | Verified |
| INL-S-913-A-CC10 | Indufil | Verified |
| INL-S-913-A-GF10 | Indufil | Verified |
| INL-S-913-A-PX10 | Indufil | Verified |
| INL-S-913-PX10 | Indufil | Verified |
| INR-S-913-A-CC10 | Indufil | Verified |
| INR-S-913-A-GF10 | Indufil | Verified |
| INR-S-913-A-PX10 | Indufil | Verified |
| INR-S-913-PX10 | Indufil | Verified |
| TMR-S-913-A-CC10 | Indufil | Verified |
| TMR-S-913-A-GF10 | Indufil | Verified |
| TMR-S-913-A-PX10 | Indufil | Verified |
| TMR-S-913-PX10 | Indufil | Verified |
| MDR-S-913-A-CC10 | Indufil | Verified |
| MDR-S-913-A-GF10 | Indufil | Verified |
| SUR-S-913-A-CC10 | Indufil | Verified |
| SUR-S-913-A-GF10 | Indufil | Verified |
Application & Compatibility
The HY-PRO HP913NSL39-10MB is designed for use in hydraulic and lubrication filtration systems. With a 10µm rating, this element is suitable for proportional valve protection and general hydraulic systems. Nitrile (Buna-N) seals provide compatibility with standard petroleum-based fluids and mineral oils.
The 250 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.
Frequently Asked Questions
What micron rating is the Hy-Pro HP913NSL39-10MB?
What are the dimensions of the Hy-Pro HP913NSL39-10MB?
What seal material does the Hy-Pro HP913NSL39-10MB use?
Is there a cross-reference for the Hy-Pro HP913NSL39-10MB?
What is the collapse pressure rating of the Hy-Pro HP913NSL39-10MB?
What is the operating temperature range for the Hy-Pro HP913NSL39-10MB?
Request a quote for the Hy-Pro HP913NSL39-10MB
Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.
Verified Cross-References
520,000+ verified cross-references on file
Fast Response
Quotes and answers within 24 hours
Expert Support
Real filtration specialists, not call centers