Hy-Pro

Hy-Pro HP900L4-6ME

Verified SourceAbsolute Rated

Dimensional schematic

Micron: 6µm
Media: G8 Dualglass
O.D.: 2.75"
I.D.: 1.337"
Length: 4.535"
Seal: EPR
Efficiency: β6 ≥ 4000
Collapse: 290 PSID

Hy-Pro HP900L4-6ME is a filter element rated at 6 µm (6 µm nominal), a beta ratio of β ≥ 6, 290 psid collapse pressure, and measuring 2.75 in OD, 1.337 in ID, and 4.54 in length. It uses G8 Dualglass media and EPR seals, rated for -65 °F to 300 °F (Hy-Pro 14M-024 drawing).

Request a quote

Pricing and availability within 24 hours.

Mon–Fri, 8am–5pm MT

1 verified cross-reference — see what replaces this →

Part Number: HP900L4-6ME
Manufacturer: Hy-Pro

Hy-Pro HP900L4-6ME specifications

The Hy-Pro HP900L4-6ME is a 6µm g8 dualglass filter element. It measures 2.75" OD x 1.337" ID x 4.535" long. Filtration efficiency is rated at β6 ≥ 4000 per ISO 16889. Seals are EPR, rated for -65°F to 300°F. Collapse pressure rating is 290 PSID. 1 verified cross-reference is available from aftermarket manufacturers. Specifications verified. Last reviewed: March 2026

Performance

Micron Rating: 6µm
Media Type: G8 Dualglass
Efficiency (ISO 16889): β6 ≥ 4000
Collapse Rating: 290 PSID
Efficiency: 99.97%
Operating Temperature: -65°F to 300°F
Series: HP900

Dimensions

O.A.L. (inches): 4.535"
O.D. (inches): 2.75"
I.D. (inches): 1.337"
Seal Material: EPREthylene Propylene (EPR)

What replaces the Hy-Pro HP900L4-6ME?

1 verified cross-reference on file. A cross-reference confirms dimensional fit and micron rating — not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.

Part Number	Manufacturer	Match
05-3396	FilterMart	Sourced

Get a quote on any of these →

Application & Compatibility

The HY-PRO HP900L4-6ME is designed for use in hydraulic and lubrication filtration systems. With a 6µm rating, this element is suitable for proportional valve protection and general hydraulic systems. EPR seals provide compatibility with standard petroleum-based fluids and mineral oils.

The 290 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.

Frequently Asked Questions

What micron rating is the Hy-Pro HP900L4-6ME?

The Hy-Pro HP900L4-6ME has a 6µm micron rating with g8 dualglass filter media, rated at β6 ≥ 4000 per ISO 16889.

What are the dimensions of the Hy-Pro HP900L4-6ME?

The Hy-Pro HP900L4-6ME measures 2.75" OD, 1.337" ID, 4.535" overall length.

What seal material does the Hy-Pro HP900L4-6ME use?

The Hy-Pro HP900L4-6ME uses EPR seals, rated for -65°F to 300°F.

Is there a cross-reference for the Hy-Pro HP900L4-6ME?

Yes. There is 1 verified cross-reference for the Hy-Pro HP900L4-6ME from manufacturers including FilterMart. Contact VerifiedFilters for specific part numbers and availability.

What is the collapse pressure rating of the Hy-Pro HP900L4-6ME?

The Hy-Pro HP900L4-6ME has a collapse pressure rating of 290 PSID. This indicates the maximum differential pressure the element can withstand without structural failure.

What is the operating temperature range for the Hy-Pro HP900L4-6ME?

The Hy-Pro HP900L4-6ME is rated for -65°F to 300°F, determined by its EPR seals.

Request a quote for the Hy-Pro HP900L4-6ME

Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.

Verified Cross-References

520,000+ verified cross-references on file

Fast Response

Quotes and answers within 24 hours

Expert Support

Real filtration specialists, not call centers