Hy-Pro
Hy-Pro HP89L16-200WV
- Micron
- 200µm
- Media
- Wire Mesh
- O.D.
- 3.78"
- I.D.
- 2.22"
- Length
- 16.72"
- Seal
- Fluorocarbon (Viton)
- Efficiency
- β200
- Collapse
- 290 PSID
Hy-Pro HP89L16-200WV is a filter element rated at 200 µm (200 µm nominal), a beta ratio of β ≥ 200, 290 psid collapse pressure, and measuring 3.78 in OD, 2.22 in ID, and 16.72 in length. It uses Wire Mesh media and Fluorocarbon (Viton) seals, rated for -20 °F to 400 °F (Hy-Pro part number decoder).
Request a quote
Pricing and availability within 24 hours.
Get a quote →Or call (385) 202-5628Mon–Fri, 8am–5pm MT
2 verified cross-references — see what replaces this →- Part Number
- HP89L16-200WV
- Manufacturer
- Hy-Pro
Hy-Pro HP89L16-200WV specifications
The Hy-Pro HP89L16-200WV is a 200µm wire mesh filter element. It measures 3.78" OD x 2.22" ID x 16.72" long. Filtration efficiency is rated at β200 per ISO 16889. Seals are Fluorocarbon (Viton), rated for -20°F to 400°F. Collapse pressure rating is 290 PSID. 2 verified cross-references are available from aftermarket manufacturers. Specifications verified. Last reviewed: April 2026
Performance
- Media Type
- Wire MeshStainless steel wire mesh
- Efficiency (ISO 16889)
- β200
- Collapse Rating
- 290 PSID
- Micron Rating
- 200µm
- Operating Temperature
- -20°F to 400°F
- Series
- HP89L
Dimensions
- O.D. (inches)
- 3.78"
- I.D. (inches)
- 2.22"
- O.A.L. (inches)
- 16.72"
- Seal Material
- Fluorocarbon (Viton)
What replaces the Hy-Pro HP89L16-200WV?
2 verified cross-references on file. A cross-reference confirms dimensional fit and micron rating — not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.
| Part Number | Manufacturer | Match |
|---|---|---|
| SF8900-16-200UWV | Swift Filters | Sourced |
| HC8900EOT16Z | Pall | Verified |
Application & Compatibility
The HY-PRO HP89L16-200WV is designed for use in hydraulic and lubrication filtration systems. With a 200µm rating, this element is suitable for pump and component protection in industrial hydraulic circuits. Fluorocarbon (Viton) seals provide compatibility with petroleum-based fluids, synthetic fluids, phosphate esters, and water-glycol mixtures.
The 290 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.
Frequently Asked Questions
What micron rating is the Hy-Pro HP89L16-200WV?
What are the dimensions of the Hy-Pro HP89L16-200WV?
What seal material does the Hy-Pro HP89L16-200WV use?
Is there a cross-reference for the Hy-Pro HP89L16-200WV?
What is the collapse pressure rating of the Hy-Pro HP89L16-200WV?
What is the operating temperature range for the Hy-Pro HP89L16-200WV?
Request a quote for the Hy-Pro HP89L16-200WV
Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.
Verified Cross-References
520,000+ verified cross-references on file
Fast Response
Quotes and answers within 24 hours
Expert Support
Real filtration specialists, not call centers