Hy-Pro

Hy-Pro HP83L8-74WV

Verified SourceAbsolute Rated

Dimensional schematic

Micron: 74µm
Media: SS Wire Mesh
O.D.: 5.96"
I.D.: 4.39"
Length: 8.09"
Seal: Fluorocarbon (Viton)
Efficiency: β200
Collapse: 250 PSID

Hy-Pro HP83L8-74WV is a filter element rated at 74 µm (74 µm nominal), a beta ratio of β ≥ 200, 250 psid collapse pressure, and measuring 5.96 in OD, 4.39 in ID, and 8.09 in length. It uses SS Wire Mesh media and Fluorocarbon (Viton) seals, rated for -20 °F to 250 °F (Hy-Pro datasheet/unknown drawing).

Request a quote

Pricing and availability within 24 hours.

Mon–Fri, 8am–5pm MT

2 verified cross-references — see what replaces this →

Part Number: HP83L8-74WV
Manufacturer: Hy-Pro

Hy-Pro HP83L8-74WV specifications

The Hy-Pro HP83L8-74WV is a 74µm ss wire mesh filter element. It measures 5.96" OD x 4.39" ID x 8.09" long. Filtration efficiency is rated at β200 per ISO 16889. Seals are Fluorocarbon (Viton), rated for -20°F to 250°F. Collapse pressure rating is 250 PSID. 2 verified cross-references are available from aftermarket manufacturers. Specifications verified. Last reviewed: May 2026

Performance

Micron Rating: 74µm
Media Type: SS Wire MeshStainless steel wire mesh
Efficiency (ISO 16889): β200
Collapse Rating: 250 PSID
Operating Temperature: -20°F to 250°F
Series: HP83L

Dimensions

O.A.L. (inches): 8.09"
O.D. (inches): 5.96"
I.D. (inches): 4.39"
Seal Material: Fluorocarbon (Viton)

What replaces the Hy-Pro HP83L8-74WV?

2 verified cross-references on file. A cross-reference confirms dimensional fit and micron rating — not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.

Part Number	Manufacturer	Match
SF8300-8-74UWV	Swift Filters	Sourced
HC8300EOR8Z	Pall	Verified

Get a quote on any of these →

Application & Compatibility

The HY-PRO HP83L8-74WV is designed for use in hydraulic and lubrication filtration systems. With a 74µm rating, this element is suitable for pump and component protection in industrial hydraulic circuits. Fluorocarbon (Viton) seals provide compatibility with petroleum-based fluids, synthetic fluids, phosphate esters, and water-glycol mixtures.

The 250 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.

Frequently Asked Questions

What micron rating is the Hy-Pro HP83L8-74WV?

The Hy-Pro HP83L8-74WV has a 74µm micron rating with ss wire mesh filter media, rated at β200 per ISO 16889.

What are the dimensions of the Hy-Pro HP83L8-74WV?

The Hy-Pro HP83L8-74WV measures 5.96" OD, 4.39" ID, 8.09" overall length.

What seal material does the Hy-Pro HP83L8-74WV use?

The Hy-Pro HP83L8-74WV uses Fluorocarbon (Viton) seals, rated for -20°F to 250°F.

Is there a cross-reference for the Hy-Pro HP83L8-74WV?

Yes. There are 2 verified cross-references for the Hy-Pro HP83L8-74WV from manufacturers including Swift Filters, Pall. Contact VerifiedFilters for specific part numbers and availability.

What is the collapse pressure rating of the Hy-Pro HP83L8-74WV?

The Hy-Pro HP83L8-74WV has a collapse pressure rating of 250 PSID. This indicates the maximum differential pressure the element can withstand without structural failure.

What is the operating temperature range for the Hy-Pro HP83L8-74WV?

The Hy-Pro HP83L8-74WV is rated for -20°F to 250°F, determined by its Fluorocarbon (Viton) seals.

Request a quote for the Hy-Pro HP83L8-74WV

Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.

Verified Cross-References

520,000+ verified cross-references on file

Fast Response

Quotes and answers within 24 hours

Expert Support

Real filtration specialists, not call centers