Hy-Pro

Hy-Pro HP83L8-149WE

Verified SourceAbsolute Rated

Dimensional schematic

Micron: 149µm
Media: SS Wire Mesh
O.D.: 5.96"
I.D.: 4.39"
Length: 8.09"
Seal: EPR (Ethylene Propylene)
Efficiency: β200
Collapse: 250 PSID

Hy-Pro HP83L8-149WE is a filter element rated at 149 µm (149 µm nominal), a beta ratio of β ≥ 200, 250 psid collapse pressure, and measuring 5.96 in OD, 4.39 in ID, and 8.09 in length. It uses SS Wire Mesh media and EPR (Ethylene Propylene) seals (Hy-Pro datasheet/unknown drawing).

Request a quote

Pricing and availability within 24 hours.

Mon–Fri, 8am–5pm MT

1 verified cross-reference — see what replaces this →

Part Number: HP83L8-149WE
Manufacturer: Hy-Pro

Hy-Pro HP83L8-149WE specifications

The Hy-Pro HP83L8-149WE is a 149µm ss wire mesh filter element. It measures 5.96" OD x 4.39" ID x 8.09" long. Filtration efficiency is rated at β200 per ISO 16889. Seals are EPR (Ethylene Propylene). Collapse pressure rating is 250 PSID. 1 verified cross-reference is available from aftermarket manufacturers. Specifications verified. Last reviewed: May 2026

Performance

Micron Rating: 149µm
Media Type: SS Wire MeshStainless steel wire mesh
Efficiency (ISO 16889): β200
Collapse Rating: 250 PSID
Series: HP83L

Dimensions

O.A.L. (inches): 8.09"
O.D. (inches): 5.96"
I.D. (inches): 4.39"
Seal Material: EPR (Ethylene Propylene)

What replaces the Hy-Pro HP83L8-149WE?

1 verified cross-reference on file. A cross-reference confirms dimensional fit and micron rating — not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.

Part Number	Manufacturer	Match
HC8300EOY8J	Pall	Verified

Get a quote on any of these →

Application & Compatibility

The HY-PRO HP83L8-149WE is designed for use in hydraulic and lubrication filtration systems. With a 149µm rating, this element is suitable for pump and component protection in industrial hydraulic circuits. EPR (Ethylene Propylene) seals provide compatibility with standard petroleum-based fluids and mineral oils.

The 250 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.

Frequently Asked Questions

What micron rating is the Hy-Pro HP83L8-149WE?

The Hy-Pro HP83L8-149WE has a 149µm micron rating with ss wire mesh filter media, rated at β200 per ISO 16889.

What are the dimensions of the Hy-Pro HP83L8-149WE?

The Hy-Pro HP83L8-149WE measures 5.96" OD, 4.39" ID, 8.09" overall length.

What seal material does the Hy-Pro HP83L8-149WE use?

The Hy-Pro HP83L8-149WE uses EPR (Ethylene Propylene) seals.

Is there a cross-reference for the Hy-Pro HP83L8-149WE?

Yes. There is 1 verified cross-reference for the Hy-Pro HP83L8-149WE from manufacturers including Pall. Contact VerifiedFilters for specific part numbers and availability.

What is the collapse pressure rating of the Hy-Pro HP83L8-149WE?

The Hy-Pro HP83L8-149WE has a collapse pressure rating of 250 PSID. This indicates the maximum differential pressure the element can withstand without structural failure.

Request a quote for the Hy-Pro HP83L8-149WE

Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.

Verified Cross-References

520,000+ verified cross-references on file

Fast Response

Quotes and answers within 24 hours

Expert Support

Real filtration specialists, not call centers