Hy-Pro
Hy-Pro HP83L16-10WE
- Micron
- 10µm
- Media
- SS Wire Mesh
- O.D.
- 5.96"
- I.D.
- 4.39"
- Length
- 16.726"
- Seal
- EPR (Ethylene Propylene)
- Efficiency
- β200
- Collapse
- 250 PSID
Hy-Pro HP83L16-10WE is a filter element rated at 10 µm (10 µm nominal), a beta ratio of β ≥ 200, 250 psid collapse pressure, and measuring 5.96 in OD, 4.39 in ID, and 16.73 in length. It uses SS Wire Mesh media and EPR (Ethylene Propylene) seals (Hy-Pro datasheet/unknown drawing).
Request a quote
Pricing and availability within 24 hours.
Get a quote →Or call (385) 202-5628Mon–Fri, 8am–5pm MT
2 verified cross-references — see what replaces this →- Part Number
- HP83L16-10WE
- Manufacturer
- Hy-Pro
Hy-Pro HP83L16-10WE specifications
The Hy-Pro HP83L16-10WE is a 10µm ss wire mesh filter element. It measures 5.96" OD x 4.39" ID x 16.726" long. Filtration efficiency is rated at β200 per ISO 16889. Seals are EPR (Ethylene Propylene). Collapse pressure rating is 250 PSID. 2 verified cross-references are available from aftermarket manufacturers. Specifications verified. Last reviewed: May 2026
Performance
- Micron Rating
- 10µm
- Media Type
- SS Wire MeshStainless steel wire mesh
- Efficiency (ISO 16889)
- β200
- Collapse Rating
- 250 PSID
- Series
- HP83L
Dimensions
- O.A.L. (inches)
- 16.726"
- O.D. (inches)
- 5.96"
- I.D. (inches)
- 4.39"
- Seal Material
- EPR (Ethylene Propylene)
What replaces the Hy-Pro HP83L16-10WE?
2 verified cross-references on file. A cross-reference confirms dimensional fit and micron rating — not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.
| Part Number | Manufacturer | Match |
|---|---|---|
| SF8300-16-10WE | Swift Filters | Sourced |
| 16QM10H | Schroeder | Verified |
Application & Compatibility
The HY-PRO HP83L16-10WE is designed for use in hydraulic and lubrication filtration systems. With a 10µm rating, this element is suitable for proportional valve protection and general hydraulic systems. EPR (Ethylene Propylene) seals provide compatibility with standard petroleum-based fluids and mineral oils.
The 250 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.
Frequently Asked Questions
What micron rating is the Hy-Pro HP83L16-10WE?
What are the dimensions of the Hy-Pro HP83L16-10WE?
What seal material does the Hy-Pro HP83L16-10WE use?
Is there a cross-reference for the Hy-Pro HP83L16-10WE?
What is the collapse pressure rating of the Hy-Pro HP83L16-10WE?
Request a quote for the Hy-Pro HP83L16-10WE
Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.
Verified Cross-References
520,000+ verified cross-references on file
Fast Response
Quotes and answers within 24 hours
Expert Support
Real filtration specialists, not call centers