Hy-Pro
Hy-Pro HP8310L39-6LE
- Micron
- 6µm nominal (β-rated, absolute 7µm)
- Media
- Fiberglass
- O.D.
- 5.93"
- I.D.
- 4.15"
- Length
- 37.935"
- Seal
- Ethylene Propylene (EPR)
- Efficiency
- 1000
- Collapse
- 250 PSID
Hy-Pro HP8310L39-6LE is a filter element rated at 7 µm (6 µm nominal), 250 psid collapse pressure, and measuring 5.93 in OD, 3.325 in ID, and 37.94 in length. It uses Fiberglass media and Ethylene Propylene (EPR) seals, rated for -65 °F to 300 °F (Hy-Pro 12J-062 drawing).
Request a quote
Pricing and availability within 24 hours.
Get a quote →Or call (385) 202-5628Mon–Fri, 8am–5pm MT
2 verified cross-references — see what replaces this →- Part Number
- HP8310L39-6LE
- Manufacturer
- Hy-Pro
Hy-Pro HP8310L39-6LE specifications
The Hy-Pro HP8310L39-6LE is a 6µm nominal (β-rated, absolute 7µm) fiberglass filter element. It measures 5.93" OD x 4.15" ID x 37.935" long. Filtration efficiency is rated at 1000 per ISO 16889. Seals are Ethylene Propylene (EPR), rated for -65°F to 300°F. Collapse pressure rating is 250 PSID. 2 verified cross-references are available from aftermarket manufacturers. Specifications verified. Last reviewed: May 2026
Performance
- Series
- HP8310L
- Media Type
- FiberglassGlass fiber media
- Micron Rating
- 6µm nominal (β-rated, absolute 7µm)
- Max Operating Pressure
- 500 psi (34.5 bar)
- Collapse Rating
- 250 PSID
- Efficiency (ISO 16889)
- 1000
- Efficiency
- 99.97%
- Operating Temperature
- -65°F to 300°F
Dimensions
- Seal Material
- Ethylene Propylene (EPR)
- O.D. (inches)
- 5.93"
- I.D. (inches)
- 4.15"
- O.A.L. (inches)
- 37.935"
Additional
- Filter Type
- Cartridge Element
- Element Length
- 39" (991 mm)
- Beta Ratio
- β7[C] ≥ 4000
- Max Temperature
- 225°F (107°C)
What replaces the Hy-Pro HP8310L39-6LE?
2 verified cross-references on file. A cross-reference confirms dimensional fit and micron rating — not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.
Get a quote on any of these →Application & Compatibility
The HY-PRO HP8310L39-6LE is designed for use in hydraulic and lubrication filtration systems. With a 6µm nominal (β-rated, absolute 7µm) rating, this element is suitable for pump and component protection in industrial hydraulic circuits. Ethylene Propylene (EPR) seals provide compatibility with standard petroleum-based fluids and mineral oils.
The 250 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.
Frequently Asked Questions
What micron rating is the Hy-Pro HP8310L39-6LE?
What are the dimensions of the Hy-Pro HP8310L39-6LE?
What seal material does the Hy-Pro HP8310L39-6LE use?
Is there a cross-reference for the Hy-Pro HP8310L39-6LE?
What is the collapse pressure rating of the Hy-Pro HP8310L39-6LE?
What is the operating temperature range for the Hy-Pro HP8310L39-6LE?
Request a quote for the Hy-Pro HP8310L39-6LE
Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.
Verified Cross-References
520,000+ verified cross-references on file
Fast Response
Quotes and answers within 24 hours
Expert Support
Real filtration specialists, not call centers