Hy-Pro
Hy-Pro HP8310L39-25WE
- Micron
- 25µm
- Media
- SS Wire Mesh
- O.D.
- 5.93"
- I.D.
- 4.15"
- Length
- 37.935"
- Seal
- EPR (Ethylene Propylene)
- Efficiency
- β200
- Collapse
- 250 PSID
Hy-Pro HP8310L39-25WE is a filter element rated at 25 µm (25 µm nominal), a beta ratio of β ≥ 200, 250 psid collapse pressure, and measuring 5.93 in OD, 4.15 in ID, and 37.94 in length. It uses SS Wire Mesh media and EPR (Ethylene Propylene) seals (Hy-Pro part number decoder).
Request a quote
Pricing and availability within 24 hours.
Get a quote →Or call (385) 202-5628Mon–Fri, 8am–5pm MT
2 verified cross-references — see what replaces this →- Part Number
- HP8310L39-25WE
- Manufacturer
- Hy-Pro
Hy-Pro HP8310L39-25WE specifications
The Hy-Pro HP8310L39-25WE is a 25µm ss wire mesh filter element. It measures 5.93" OD x 4.15" ID x 37.935" long. Filtration efficiency is rated at β200 per ISO 16889. Seals are EPR (Ethylene Propylene). Collapse pressure rating is 250 PSID. 2 verified cross-references are available from aftermarket manufacturers. Specifications verified. Last reviewed: May 2026
Performance
- Series
- HP8310L
- Media Type
- SS Wire MeshStainless steel wire mesh
- Max Operating Pressure
- 500 psi (34.5 bar)
- Collapse Rating
- 250 PSID
- Micron Rating
- 25µm
- Efficiency (ISO 16889)
- β200
Dimensions
- Seal Material
- EPR (Ethylene Propylene)
- O.A.L. (inches)
- 37.935"
- O.D. (inches)
- 5.93"
- I.D. (inches)
- 4.15"
Additional
- Filter Type
- Cartridge Element
- Element Length
- 39" (991 mm)
- Beta Ratio
- Nominal
- Max Temperature
- 225°F (107°C)
What replaces the Hy-Pro HP8310L39-25WE?
2 verified cross-references on file. A cross-reference confirms dimensional fit and micron rating — not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.
| Part Number | Manufacturer | Match |
|---|---|---|
| SF8310-39-25UWE | Swift Filters | Sourced |
| 39QPMLM25H | Schroeder | Verified |
Application & Compatibility
The HY-PRO HP8310L39-25WE is designed for use in hydraulic and lubrication filtration systems. With a 25µm rating, this element is suitable for pump and component protection in industrial hydraulic circuits. EPR (Ethylene Propylene) seals provide compatibility with standard petroleum-based fluids and mineral oils.
The 250 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.
Frequently Asked Questions
What micron rating is the Hy-Pro HP8310L39-25WE?
What are the dimensions of the Hy-Pro HP8310L39-25WE?
What seal material does the Hy-Pro HP8310L39-25WE use?
Is there a cross-reference for the Hy-Pro HP8310L39-25WE?
What is the collapse pressure rating of the Hy-Pro HP8310L39-25WE?
Request a quote for the Hy-Pro HP8310L39-25WE
Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.
Verified Cross-References
520,000+ verified cross-references on file
Fast Response
Quotes and answers within 24 hours
Expert Support
Real filtration specialists, not call centers