Hy-Pro

Hy-Pro HP8304L13-6LB

Verified SourceAbsolute Rated

Dimensional schematic

Micron: 6µm nominal (β-rated, absolute 7µm)
Media: Fiberglass
O.D.: 5.961"
I.D.: 3.793"
Length: 13"
Seal: Nitrile (Buna)
Efficiency: 1000
Collapse: 150 PSID

Hy-Pro HP8304L13-6LB is a filter element rated at 7 µm (6 µm nominal), 150 psid collapse pressure, and measuring 5.961 in OD, 3.793 in ID, and 13 in length. It uses Fiberglass media and Nitrile (Buna) seals, rated for -45 °F to 225 °F (Hy-Pro HP8304L-P.pdf 13M-010 Rev K).

Request a quote

Pricing and availability within 24 hours.

Mon–Fri, 8am–5pm MT

2 verified cross-references — see what replaces this →

Part Number: HP8304L13-6LB
Manufacturer: Hy-Pro

Hy-Pro HP8304L13-6LB specifications

The Hy-Pro HP8304L13-6LB is a 6µm nominal (β-rated, absolute 7µm) fiberglass filter element. It measures 5.961" OD x 3.793" ID x 13" long. Filtration efficiency is rated at 1000 per ISO 16889. Seals are Nitrile (Buna), rated for -45°F to 225°F. Collapse pressure rating is 150 PSID. 2 verified cross-references are available from aftermarket manufacturers. Specifications verified. Last reviewed: April 2026

Performance

Micron Rating: 6µm nominal (β-rated, absolute 7µm)
Media Type: FiberglassGlass fiber media
Efficiency (ISO 16889): 1000
Collapse Rating: 150 PSID
Efficiency: 99.97%
Operating Temperature: -45°F to 225°F
Series: HP8304L

Dimensions

O.D. (inches): 5.961"
I.D. (inches): 3.793"
O.A.L. (inches): 13"
Seal Material: Nitrile (Buna)

What replaces the Hy-Pro HP8304L13-6LB?

2 verified cross-references on file. A cross-reference confirms dimensional fit and micron rating — not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.

Part Number	Manufacturer	Match
HC8304FCN13H	Pall	Verified
HC8304FRN13H	Pall	Verified

Get a quote on any of these →

Application & Compatibility

The HY-PRO HP8304L13-6LB is designed for use in hydraulic and lubrication filtration systems. With a 6µm nominal (β-rated, absolute 7µm) rating, this element is suitable for pump and component protection in industrial hydraulic circuits. Nitrile (Buna) seals provide compatibility with standard petroleum-based fluids and mineral oils.

The 150 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.

Frequently Asked Questions

What micron rating is the Hy-Pro HP8304L13-6LB?

The Hy-Pro HP8304L13-6LB has a 6µm nominal (β-rated, absolute 7µm) micron rating with fiberglass filter media, rated at 1000 per ISO 16889.

What are the dimensions of the Hy-Pro HP8304L13-6LB?

The Hy-Pro HP8304L13-6LB measures 5.961" OD, 3.793" ID, 13" overall length.

What seal material does the Hy-Pro HP8304L13-6LB use?

The Hy-Pro HP8304L13-6LB uses Nitrile (Buna) seals, rated for -45°F to 225°F.

Is there a cross-reference for the Hy-Pro HP8304L13-6LB?

Yes. There are 2 verified cross-references for the Hy-Pro HP8304L13-6LB from manufacturers including Pall. Contact VerifiedFilters for specific part numbers and availability.

What is the collapse pressure rating of the Hy-Pro HP8304L13-6LB?

The Hy-Pro HP8304L13-6LB has a collapse pressure rating of 150 PSID. This indicates the maximum differential pressure the element can withstand without structural failure.

What is the operating temperature range for the Hy-Pro HP8304L13-6LB?

The Hy-Pro HP8304L13-6LB is rated for -45°F to 225°F, determined by its Nitrile (Buna) seals.

Request a quote for the Hy-Pro HP8304L13-6LB

Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.

Verified Cross-References

520,000+ verified cross-references on file

Fast Response

Quotes and answers within 24 hours

Expert Support

Real filtration specialists, not call centers