Hy-Pro
Hy-Pro HP801L10-100W
- Micron
- 100µm
- Media
- Stainless Steel Wire Mesh
- O.D.
- 3.32"
- I.D.
- 1.86"
- Length
- 10.12"
- Seal
- Buna-N
- Efficiency
- β200
- Collapse
- 3000 PSID
Hy-Pro HP801L10-100W is a filter element rated at 100 µm (100 µm nominal), a beta ratio of β ≥ 200, 3000 psid collapse pressure, and measuring 3.32 in OD, 1.86 in ID, and 10.12 in length. It uses Stainless Steel Wire Mesh media and Buna-N seals (Hy-Pro datasheet/unknown drawing).
Request a quote
Pricing and availability within 24 hours.
Get a quote →Or call (385) 202-5628Mon–Fri, 8am–5pm MT
11 verified cross-references — see what replaces this →- Part Number
- HP801L10-100W
- Manufacturer
- Hy-Pro
Hy-Pro HP801L10-100W specifications
The Hy-Pro HP801L10-100W is a 100µm stainless steel wire mesh filter element. It measures 3.32" OD x 1.86" ID x 10.12" long. Filtration efficiency is rated at β200 per ISO 16889. Seals are Buna-N. Collapse pressure rating is 3000 PSID. 11 verified cross-references are available from aftermarket manufacturers. Specifications verified. Last reviewed: May 2026
Performance
- Media Type
- Stainless Steel Wire Mesh
- Efficiency (ISO 16889)
- β200
- Micron Rating
- 100µm
- Collapse Rating
- 3000 PSID
- Series
- HP801L
Dimensions
- O.D. (inches)
- 3.32"
- I.D. (inches)
- 1.86"
- O.A.L. (inches)
- 10.12"
- Seal Material
- Buna-N
What replaces the Hy-Pro HP801L10-100W?
11 verified cross-references on file. A cross-reference confirms dimensional fit and micron rating — not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.
| Part Number | Manufacturer | Match |
|---|---|---|
| SF080-10-100UWHP | Swift Filters | Sourced |
| Pi9530 | Mahle | Verified |
| 04.PI9530.100G.HR.E.O | Internormen | Verified |
| 306516 | Internormen | Verified |
| 306516-100G | Internormen | Verified |
| Pi9530DRGVST100 | Mahle | Verified |
| 18.9530G100-F-00-0-P | — | Verified |
| R928018570 | Rexroth | Verified |
| 18.9530G100-F00-0-M | EPE | Verified |
| 77689300 | Mahle | Verified |
| 06-5584 | FilterMart | Sourced |
Application & Compatibility
The HY-PRO HP801L10-100W is designed for use in hydraulic and lubrication filtration systems. With a 100µm rating, this element is suitable for pump and component protection in industrial hydraulic circuits. Buna-N seals provide compatibility with standard petroleum-based fluids and mineral oils.
The 3000 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.
Frequently Asked Questions
What micron rating is the Hy-Pro HP801L10-100W?
What are the dimensions of the Hy-Pro HP801L10-100W?
What seal material does the Hy-Pro HP801L10-100W use?
Is there a cross-reference for the Hy-Pro HP801L10-100W?
What is the collapse pressure rating of the Hy-Pro HP801L10-100W?
Request a quote for the Hy-Pro HP801L10-100W
Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.
Verified Cross-References
520,000+ verified cross-references on file
Fast Response
Quotes and answers within 24 hours
Expert Support
Real filtration specialists, not call centers