Hy-Pro
Hy-Pro HP753L19-25LV
- Micron
- 25µm
- Media
- microglass
- O.D.
- 3.965"
- I.D.
- 2.415"
- Length
- 18.98"
- Seal
- Viton (FKM)
- Efficiency
- β1000
- Collapse
- 250 PSID
Hy-Pro HP753L19-25LV is a filter element rated at 25 µm (25 µm nominal), a beta ratio of β ≥ 1000, 250 psid collapse pressure, and measuring 3.965 in OD, 2.415 in ID, and 18.98 in length. It uses microglass media and Viton (FKM) seals, rated for -20 °F to 250 °F (Hy-Pro datasheet/unknown drawing).
Request a quote
Pricing and availability within 24 hours.
Get a quote →Or call (385) 202-5628Mon–Fri, 8am–5pm MT
5 verified cross-references — see what replaces this →- Part Number
- HP753L19-25LV
- Manufacturer
- Hy-Pro
Hy-Pro HP753L19-25LV specifications
The Hy-Pro HP753L19-25LV is a 25µm microglass filter element. It measures 3.965" OD x 2.415" ID x 18.98" long. Filtration efficiency is rated at β1000 per ISO 16889. Seals are Viton (FKM), rated for -20°F to 250°F. Collapse pressure rating is 250 PSID. 5 verified cross-references are available from aftermarket manufacturers. Specifications verified. Last reviewed: May 2026
Performance
- Series
- HP753L
- Max Operating Pressure
- 200 psi (13.8 bar)
- Collapse Rating
- 250 PSID
- Micron Rating
- 25µm
- Media Type
- microglass
- Efficiency (ISO 16889)
- β1000
- Operating Temperature
- -20°F to 250°F
Dimensions
- Seal Material
- Viton (FKM)
- O.D. (inches)
- 3.965"
- I.D. (inches)
- 2.415"
- O.A.L. (inches)
- 18.98"
Additional
- Filter Type
- Spin-On Element
- Max Temperature
- 225°F (107°C)
What replaces the Hy-Pro HP753L19-25LV?
5 verified cross-references on file. A cross-reference confirms dimensional fit and micron rating — not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.
| Part Number | Manufacturer | Match |
|---|---|---|
| 852754MIC10V | Mahle | Verified |
| 852754SMX25V | Mahle | Verified |
| DMD754L10V | Filtrec | Verified |
| DMD754E20V | Filtrec | Verified |
| 2100S25BNV | Hydac | Verified |
Application & Compatibility
The HY-PRO HP753L19-25LV is designed for use in hydraulic and lubrication filtration systems. With a 25µm rating, this element is suitable for pump and component protection in industrial hydraulic circuits. Viton (FKM) seals provide compatibility with petroleum-based fluids, synthetic fluids, phosphate esters, and water-glycol mixtures.
The 250 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.
Frequently Asked Questions
What micron rating is the Hy-Pro HP753L19-25LV?
What are the dimensions of the Hy-Pro HP753L19-25LV?
What seal material does the Hy-Pro HP753L19-25LV use?
Is there a cross-reference for the Hy-Pro HP753L19-25LV?
What is the collapse pressure rating of the Hy-Pro HP753L19-25LV?
What is the operating temperature range for the Hy-Pro HP753L19-25LV?
Request a quote for the Hy-Pro HP753L19-25LV
Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.
Verified Cross-References
520,000+ verified cross-references on file
Fast Response
Quotes and answers within 24 hours
Expert Support
Real filtration specialists, not call centers