VFVerifiedFilters

Hy-Pro

Hy-Pro HP53HL4-15WT

Verified SourceAbsolute Rated
OD 1.735"L 4.5"ID 1.025"
Dimensional schematic
Micron
15µm
Media
Wire Mesh
O.D.
1.735"
I.D.
1.025"
Length
4.5"
Seal
PTFE
Efficiency
200
Collapse
3000 PSID

Hy-Pro HP53HL4-15WT is a filter element rated at 15 µm (15 µm nominal), 3000 psid collapse pressure, and measuring 1.735 in OD, 1.025 in ID, and 4.5 in length. It uses Wire Mesh media (Hy-Pro 12G-018 drawing).

Request a quote

Pricing and availability within 24 hours.

Get a quote →Or call (385) 202-5628

Mon–Fri, 8am–5pm MT

2 verified cross-references — see what replaces this →
Part Number
HP53HL4-15WT
Manufacturer
Hy-Pro

Hy-Pro HP53HL4-15WT specifications

The Hy-Pro HP53HL4-15WT is a 15µm wire mesh filter element. It measures 1.735" OD x 1.025" ID x 4.5" long. Filtration efficiency is rated at 200 per ISO 16889. Seals are PTFE. Collapse pressure rating is 3000 PSID. 2 verified cross-references are available from aftermarket manufacturers. Specifications verified. Last reviewed: May 2026

Performance

Series
HP53HL
Max Operating Pressure
6090 psi (420 bar)
Collapse Rating
3000 PSID
Micron Rating
15µm
Media Type
Wire Mesh
Efficiency (ISO 16889)
200

Dimensions

Seal Material
PTFE
O.D. (inches)
1.735"
I.D. (inches)
1.025"
O.A.L. (inches)
4.5"

Additional

Filter Type
Cartridge Element
Element Length
4" (102 mm)
Max Temperature
225°F (107°C)

What replaces the Hy-Pro HP53HL4-15WT?

2 verified cross-references on file. A cross-reference confirms dimensional fit and micron rating — not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.

Part NumberManufacturerMatch
SF535-5-05UWWTEFSwift FiltersSourced
06-5372FilterMartSourced
Get a quote on any of these →

Application & Compatibility

The HY-PRO HP53HL4-15WT is designed for use in hydraulic and lubrication filtration systems. With a 15µm rating, this element is suitable for proportional valve protection and general hydraulic systems. PTFE seals provide compatibility with standard petroleum-based fluids and mineral oils.

The 3000 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.

Frequently Asked Questions

What micron rating is the Hy-Pro HP53HL4-15WT?

The Hy-Pro HP53HL4-15WT has a 15µm micron rating with wire mesh filter media, rated at 200 per ISO 16889.

What are the dimensions of the Hy-Pro HP53HL4-15WT?

The Hy-Pro HP53HL4-15WT measures 1.735" OD, 1.025" ID, 4.5" overall length.

What seal material does the Hy-Pro HP53HL4-15WT use?

The Hy-Pro HP53HL4-15WT uses PTFE seals.

Is there a cross-reference for the Hy-Pro HP53HL4-15WT?

Yes. There are 2 verified cross-references for the Hy-Pro HP53HL4-15WT from manufacturers including Swift Filters, FilterMart. Contact VerifiedFilters for specific part numbers and availability.

What is the collapse pressure rating of the Hy-Pro HP53HL4-15WT?

The Hy-Pro HP53HL4-15WT has a collapse pressure rating of 3000 PSID. This indicates the maximum differential pressure the element can withstand without structural failure.

Request a quote for the Hy-Pro HP53HL4-15WT

Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.

Add your number and we'll call you back within the hour with pricing.

Verified Cross-References

520,000+ verified cross-references on file

Fast Response

Quotes and answers within 24 hours

Expert Support

Real filtration specialists, not call centers