VFVerifiedFilters

Hy-Pro

Hy-Pro HP501L5-100W

Verified SourceAbsolute Rated
OD 3.32"L 5.52"ID 1.86"
Dimensional schematic
Micron
100µm
Media
Stainless Steel Wire Mesh
O.D.
3.32"
I.D.
1.86"
Length
5.52"
Seal
Buna-N
Efficiency
β200
Collapse
3000 PSID

Hy-Pro HP501L5-100W is a filter element rated at 100 µm (100 µm nominal), a beta ratio of β ≥ 200, 3000 psid collapse pressure, and measuring 3.32 in OD, 1.86 in ID, and 5.52 in length. It uses Stainless Steel Wire Mesh media and Buna-N seals (Hy-Pro 16F-002 drawing).

Request a quote

Pricing and availability within 24 hours.

Get a quote →Or call (385) 202-5628

Mon–Fri, 8am–5pm MT

10 verified cross-references — see what replaces this →
Part Number
HP501L5-100W
Manufacturer
Hy-Pro

Hy-Pro HP501L5-100W specifications

The Hy-Pro HP501L5-100W is a 100µm stainless steel wire mesh filter element. It measures 3.32" OD x 1.86" ID x 5.52" long. Filtration efficiency is rated at β200 per ISO 16889. Seals are Buna-N. Collapse pressure rating is 3000 PSID. 10 verified cross-references are available from aftermarket manufacturers. Specifications verified. Last reviewed: May 2026

Performance

Media Type
Stainless Steel Wire Mesh
Efficiency (ISO 16889)
β200
Micron Rating
100µm
Collapse Rating
3000 PSID
Series
HP501L

Dimensions

O.D. (inches)
3.32"
I.D. (inches)
1.86"
O.A.L. (inches)
5.52"
Seal Material
Buna-N

What replaces the Hy-Pro HP501L5-100W?

10 verified cross-references on file. A cross-reference confirms dimensional fit and micron rating — not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.

Part NumberManufacturerMatch
SF050-6-100WSwift FiltersSourced
Pi9515MahleVerified
04.PI9515.100G.HR.E.OInternormenVerified
306503InternormenVerified
306503-100GInternormenVerified
Pi9515DRGVST100MahleVerified
18.9515G100F-00-0-P—Verified
R928018550RexrothVerified
18.9515G100-F00-0-MEPEVerified
77689292MahleVerified
Get a quote on any of these →

Application & Compatibility

The HY-PRO HP501L5-100W is designed for use in hydraulic and lubrication filtration systems. With a 100µm rating, this element is suitable for pump and component protection in industrial hydraulic circuits. Buna-N seals provide compatibility with standard petroleum-based fluids and mineral oils.

The 3000 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.

Frequently Asked Questions

What micron rating is the Hy-Pro HP501L5-100W?

The Hy-Pro HP501L5-100W has a 100µm micron rating with stainless steel wire mesh filter media, rated at β200 per ISO 16889.

What are the dimensions of the Hy-Pro HP501L5-100W?

The Hy-Pro HP501L5-100W measures 3.32" OD, 1.86" ID, 5.52" overall length.

What seal material does the Hy-Pro HP501L5-100W use?

The Hy-Pro HP501L5-100W uses Buna-N seals.

Is there a cross-reference for the Hy-Pro HP501L5-100W?

Yes. There are 10 verified cross-references for the Hy-Pro HP501L5-100W from manufacturers including Swift Filters, Mahle, Internormen, Rexroth. Contact VerifiedFilters for specific part numbers and availability.

What is the collapse pressure rating of the Hy-Pro HP501L5-100W?

The Hy-Pro HP501L5-100W has a collapse pressure rating of 3000 PSID. This indicates the maximum differential pressure the element can withstand without structural failure.

Request a quote for the Hy-Pro HP501L5-100W

Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.

Add your number and we'll call you back within the hour with pricing.

Verified Cross-References

520,000+ verified cross-references on file

Fast Response

Quotes and answers within 24 hours

Expert Support

Real filtration specialists, not call centers