Hy-Pro

Hy-Pro HP44L10-1AN

Verified Source

Dimensional schematic

Micron: 1µm
Media: Water Absorptive
O.D.: 2.36"
I.D.: 1.39"
Length: 9.84"
Seal: Nitrile (Buna-N)
Collapse: 425 PSID

Hy-Pro HP44L10-1AN is a filter element rated at 1 µm (1 µm nominal), 425 psid collapse pressure, and measuring 2.36 in OD, 1.39 in ID, and 9.84 in length. It uses Water Absorptive media and Nitrile (Buna-N) seals (Hy-Pro 17F-034 drawing).

Request a quote

Pricing and availability within 24 hours.

Mon–Fri, 8am–5pm MT

1 verified cross-reference — see what replaces this →

Part Number: HP44L10-1AN
Manufacturer: Hy-Pro

Hy-Pro HP44L10-1AN specifications

The Hy-Pro HP44L10-1AN is a 1µm water absorptive filter element. It measures 2.36" OD x 1.39" ID x 9.84" long. Seals are Nitrile (Buna-N). Collapse pressure rating is 425 PSID. 1 verified cross-reference is available from aftermarket manufacturers. Specifications verified. Last reviewed: May 2026

Performance

Micron Rating: 1µm
Media Type: Water Absorptive
Collapse Rating: 425 PSID
Series: HP44L

Dimensions

O.D. (inches): 2.36"
O.A.L. (inches): 9.84"
I.D. (inches): 1.39"
Seal Material: Nitrile (Buna-N)

What replaces the Hy-Pro HP44L10-1AN?

1 verified cross-reference on file. A cross-reference confirms dimensional fit and micron rating — not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.

Part Number	Manufacturer	Match
1.0013AS1-A00-0-N	EPE	Verified

Get a quote on any of these →

Application & Compatibility

The HY-PRO HP44L10-1AN is designed for use in hydraulic and lubrication filtration systems. With a 1µm rating, this element is suitable for servo valve protection and high-precision hydraulic systems. Nitrile (Buna-N) seals provide compatibility with standard petroleum-based fluids and mineral oils.

The 425 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.

Frequently Asked Questions

What micron rating is the Hy-Pro HP44L10-1AN?

The Hy-Pro HP44L10-1AN has a 1µm micron rating with water absorptive filter media.

What are the dimensions of the Hy-Pro HP44L10-1AN?

The Hy-Pro HP44L10-1AN measures 2.36" OD, 1.39" ID, 9.84" overall length.

What seal material does the Hy-Pro HP44L10-1AN use?

The Hy-Pro HP44L10-1AN uses Nitrile (Buna-N) seals.

Is there a cross-reference for the Hy-Pro HP44L10-1AN?

Yes. There is 1 verified cross-reference for the Hy-Pro HP44L10-1AN from manufacturers including EPE. Contact VerifiedFilters for specific part numbers and availability.

What is the collapse pressure rating of the Hy-Pro HP44L10-1AN?

The Hy-Pro HP44L10-1AN has a collapse pressure rating of 425 PSID. This indicates the maximum differential pressure the element can withstand without structural failure.

Request a quote for the Hy-Pro HP44L10-1AN

Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.

Verified Cross-References

520,000+ verified cross-references on file

Fast Response

Quotes and answers within 24 hours

Expert Support

Real filtration specialists, not call centers