Hy-Pro

Hy-Pro HP419NL13-25MB

Verified Source

Dimensional schematic

Micron: 25µm
Media: Microglass
O.D.: 3.1"
I.D.: 1.605"
Length: 13.11"
Seal: Buna-N
Collapse: 450 PSID

Hy-Pro HP419NL13-25MB is a filter element rated at 25 µm (25 µm nominal), 450 psid collapse pressure, and measuring 3.1 in OD, 1.605 in ID, and 13.11 in length. It uses Microglass media and Buna-N seals (Hy-Pro datasheet/unknown drawing).

Request a quote

Pricing and availability within 24 hours.

Mon–Fri, 8am–5pm MT

1 verified cross-reference — see what replaces this →

Part Number: HP419NL13-25MB
Manufacturer: Hy-Pro

Hy-Pro HP419NL13-25MB specifications

The Hy-Pro HP419NL13-25MB is a 25µm microglass filter element. It measures 3.1" OD x 1.605" ID x 13.11" long. Seals are Buna-N. Collapse pressure rating is 450 PSID. 1 verified cross-reference is available from aftermarket manufacturers. Specifications verified. Last reviewed: May 2026

Performance

Series: HP419NL
Media Type: Microglass
Micron Rating: 25µm
Max Operating Pressure: 6090 psi (420 bar)
Collapse Rating: 450 PSID

Dimensions

Seal Material: Buna-N
O.D. (inches): 3.1"
I.D. (inches): 1.605"
O.A.L. (inches): 13.11"

Additional

Filter Type: Cartridge Element
Element Length: 13" (330 mm)
Beta Ratio: β22[C] ≥ 4000
Max Temperature: 225°F (107°C)

What replaces the Hy-Pro HP419NL13-25MB?

1 verified cross-reference on file. A cross-reference confirms dimensional fit and micron rating — not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.

Part Number	Manufacturer	Match
SF419DN-13-25UM	Swift Filters	Sourced

Get a quote on any of these →

Application & Compatibility

The HY-PRO HP419NL13-25MB is designed for use in hydraulic and lubrication filtration systems. With a 25µm rating, this element is suitable for pump and component protection in industrial hydraulic circuits. Buna-N seals provide compatibility with standard petroleum-based fluids and mineral oils.

The 450 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.

Frequently Asked Questions

What micron rating is the Hy-Pro HP419NL13-25MB?

The Hy-Pro HP419NL13-25MB has a 25µm micron rating with microglass filter media.

What are the dimensions of the Hy-Pro HP419NL13-25MB?

The Hy-Pro HP419NL13-25MB measures 3.1" OD, 1.605" ID, 13.11" overall length.

What seal material does the Hy-Pro HP419NL13-25MB use?

The Hy-Pro HP419NL13-25MB uses Buna-N seals.

Is there a cross-reference for the Hy-Pro HP419NL13-25MB?

Yes. There is 1 verified cross-reference for the Hy-Pro HP419NL13-25MB from manufacturers including Swift Filters. Contact VerifiedFilters for specific part numbers and availability.

What is the collapse pressure rating of the Hy-Pro HP419NL13-25MB?

The Hy-Pro HP419NL13-25MB has a collapse pressure rating of 450 PSID. This indicates the maximum differential pressure the element can withstand without structural failure.

Request a quote for the Hy-Pro HP419NL13-25MB

Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.

Verified Cross-References

520,000+ verified cross-references on file

Fast Response

Quotes and answers within 24 hours

Expert Support

Real filtration specialists, not call centers