Hy-Pro
Hy-Pro HP419NL13-12MB
- Micron
- 12µm
- Media
- Microglass
- O.D.
- 3.1"
- I.D.
- 1.605"
- Length
- 13.11"
- Seal
- Buna-N
- Collapse
- 450 PSID
Hy-Pro HP419NL13-12MB is a filter element rated at 12 µm (12 µm nominal), 450 psid collapse pressure, and measuring 3.1 in OD, 1.605 in ID, and 13.11 in length. It uses Microglass media and Buna-N seals (Hy-Pro datasheet/unknown drawing).
Request a quote
Pricing and availability within 24 hours.
Get a quote →Or call (385) 202-5628Mon–Fri, 8am–5pm MT
2 verified cross-references — see what replaces this →- Part Number
- HP419NL13-12MB
- Manufacturer
- Hy-Pro
Hy-Pro HP419NL13-12MB specifications
The Hy-Pro HP419NL13-12MB is a 12µm microglass filter element. It measures 3.1" OD x 1.605" ID x 13.11" long. Seals are Buna-N. Collapse pressure rating is 450 PSID. 2 verified cross-references are available from aftermarket manufacturers. Specifications verified. Last reviewed: May 2026
Performance
- Series
- HP419NL
- Media Type
- Microglass
- Micron Rating
- 12µm
- Max Operating Pressure
- 6090 psi (420 bar)
- Collapse Rating
- 450 PSID
Dimensions
- Seal Material
- Buna-N
- O.D. (inches)
- 3.1"
- I.D. (inches)
- 1.605"
- O.A.L. (inches)
- 13.11"
Additional
- Filter Type
- Cartridge Element
- Element Length
- 13" (330 mm)
- Beta Ratio
- β5[C] ≥ 4000
- Max Temperature
- 225°F (107°C)
What replaces the Hy-Pro HP419NL13-12MB?
2 verified cross-references on file. A cross-reference confirms dimensional fit and micron rating — not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.
| Part Number | Manufacturer | Match |
|---|---|---|
| SF419-13-12UM | Swift Filters | Sourced |
| 05-3830 | FilterMart | Sourced |
Application & Compatibility
The HY-PRO HP419NL13-12MB is designed for use in hydraulic and lubrication filtration systems. With a 12µm rating, this element is suitable for proportional valve protection and general hydraulic systems. Buna-N seals provide compatibility with standard petroleum-based fluids and mineral oils.
The 450 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.
Frequently Asked Questions
What micron rating is the Hy-Pro HP419NL13-12MB?
What are the dimensions of the Hy-Pro HP419NL13-12MB?
What seal material does the Hy-Pro HP419NL13-12MB use?
Is there a cross-reference for the Hy-Pro HP419NL13-12MB?
What is the collapse pressure rating of the Hy-Pro HP419NL13-12MB?
Request a quote for the Hy-Pro HP419NL13-12MB
Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.
Verified Cross-References
520,000+ verified cross-references on file
Fast Response
Quotes and answers within 24 hours
Expert Support
Real filtration specialists, not call centers