VFVerifiedFilters

Hy-Pro

Hy-Pro HP3A1L3-1MT

Verified SourceAbsolute Rated
OD 1.64"L 3.45"ID 0.895"
Dimensional schematic
Micron
1µm nominal (β-rated, absolute 3µm)
Media
Dualglass
O.D.
1.64"
I.D.
0.895"
Length
3.45"
Seal
PTFE
Efficiency
β4000
Collapse
250 PSID

Hy-Pro HP3A1L3-1MT is a filter element rated at 3 µm (1 µm nominal), a beta ratio of β ≥ 4000, 250 psid collapse pressure, and measuring 1.64 in OD, 0.895 in ID, and 3.45 in length. It uses Dualglass media and PTFE seals (Donaldson Hy-Pro HP101 Data Sheet FE-101-071724, p.4).

Request a quote

Pricing and availability within 24 hours.

Get a quote →Or call (385) 202-5628

Mon–Fri, 8am–5pm MT

2 verified cross-references — see what replaces this →
Part Number
HP3A1L3-1MT
Manufacturer
Hy-Pro

Hy-Pro HP3A1L3-1MT specifications

The Hy-Pro HP3A1L3-1MT is a 1µm nominal (β-rated, absolute 3µm) dualglass filter element. It measures 1.64" OD x 0.895" ID x 3.45" long. Filtration efficiency is rated at β4000 per ISO 16889. Seals are PTFE. Collapse pressure rating is 250 PSID. 2 verified cross-references are available from aftermarket manufacturers. Specifications verified. Last reviewed: May 2026

Performance

Micron Rating
1µm nominal (β-rated, absolute 3µm)
Media Type
DualglassG8 High-performance glass fiber media
Efficiency (ISO 16889)
β4000
Efficiency
99.97%
Collapse Rating
250 PSID
Series
HP3A1L

Dimensions

O.D. (inches)
1.64"
I.D. (inches)
0.895"
O.A.L. (inches)
3.45"
Seal Material
PTFE

What replaces the Hy-Pro HP3A1L3-1MT?

2 verified cross-references on file. A cross-reference confirms dimensional fit and micron rating — not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.

Part NumberManufacturerMatch
SF6235-3A-1MG-TEFSwift FiltersSourced
4003FB1AMNormanVerified
Get a quote on any of these →

Application & Compatibility

The HY-PRO HP3A1L3-1MT is designed for use in hydraulic and lubrication filtration systems. With a 1µm nominal (β-rated, absolute 3µm) rating, this element is suitable for proportional valve protection and general hydraulic systems. PTFE seals provide compatibility with standard petroleum-based fluids and mineral oils.

The 250 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.

Frequently Asked Questions

What micron rating is the Hy-Pro HP3A1L3-1MT?

The Hy-Pro HP3A1L3-1MT has a 1µm nominal (β-rated, absolute 3µm) micron rating with dualglass filter media, rated at β4000 per ISO 16889.

What are the dimensions of the Hy-Pro HP3A1L3-1MT?

The Hy-Pro HP3A1L3-1MT measures 1.64" OD, 0.895" ID, 3.45" overall length.

What seal material does the Hy-Pro HP3A1L3-1MT use?

The Hy-Pro HP3A1L3-1MT uses PTFE seals.

Is there a cross-reference for the Hy-Pro HP3A1L3-1MT?

Yes. There are 2 verified cross-references for the Hy-Pro HP3A1L3-1MT from manufacturers including Swift Filters, Norman. Contact VerifiedFilters for specific part numbers and availability.

What is the collapse pressure rating of the Hy-Pro HP3A1L3-1MT?

The Hy-Pro HP3A1L3-1MT has a collapse pressure rating of 250 PSID. This indicates the maximum differential pressure the element can withstand without structural failure.

Request a quote for the Hy-Pro HP3A1L3-1MT

Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.

Add your number and we'll call you back within the hour with pricing.

Verified Cross-References

520,000+ verified cross-references on file

Fast Response

Quotes and answers within 24 hours

Expert Support

Real filtration specialists, not call centers