Hy-Pro

Hy-Pro HP319L8-12EV

Verified Source

Dimensional schematic

Micron: 12µm
Media: Polyester
O.D.: 3.125"
I.D.: 1.65"
Length: 8.78"
Seal: Viton (FKM)
Collapse: 150 PSID

Hy-Pro HP319L8-12EV hydraulic filter element. Corrosion resistant steel end caps and center tube. Viton seals (-20°F to 250°F).

Request a quote

Pricing and availability within 24 hours.

Mon–Fri, 8am–5pm MT

3 verified cross-references — see what replaces this →

Part Number: HP319L8-12EV
Manufacturer: Hy-Pro

Hy-Pro HP319L8-12EV specifications

The Hy-Pro HP319L8-12EV is a 12µm polyester filter element. It measures 3.125" OD x 1.65" ID x 8.78" long. Seals are Viton (FKM), rated for -20°F to 250°F. Collapse pressure rating is 150 PSID. 3 verified cross-references are available from aftermarket manufacturers. Specifications verified. Last reviewed: May 2026

Performance

Micron Rating: 12µm
Media Type: Polyester
Collapse Rating: 150 PSID
Operating Temperature: -20°F to 250°F
Series: HP319L

Dimensions

O.A.L. (inches): 8.78"
O.D. (inches): 3.125"
I.D. (inches): 1.65"
Seal Material: Viton (FKM)

What replaces the Hy-Pro HP319L8-12EV?

3 verified cross-references on file. A cross-reference confirms dimensional fit and micron rating — not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.

Part Number	Manufacturer	Match
SF319-8-12UMV-SDM	Swift Filters	Sourced
UE319AS08Z	Pall	Verified
05-3031	FilterMart	Sourced

Get a quote on any of these →

Application & Compatibility

The HY-PRO HP319L8-12EV is designed for use in hydraulic and lubrication filtration systems. With a 12µm rating, this element is suitable for proportional valve protection and general hydraulic systems. Viton (FKM) seals provide compatibility with petroleum-based fluids, synthetic fluids, phosphate esters, and water-glycol mixtures.

The 150 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.

Frequently Asked Questions

What micron rating is the Hy-Pro HP319L8-12EV?

The Hy-Pro HP319L8-12EV has a 12µm micron rating with polyester filter media.

What are the dimensions of the Hy-Pro HP319L8-12EV?

The Hy-Pro HP319L8-12EV measures 3.125" OD, 1.65" ID, 8.78" overall length.

What seal material does the Hy-Pro HP319L8-12EV use?

The Hy-Pro HP319L8-12EV uses Viton (FKM) seals, rated for -20°F to 250°F.

Is there a cross-reference for the Hy-Pro HP319L8-12EV?

Yes. There are 3 verified cross-references for the Hy-Pro HP319L8-12EV from manufacturers including Swift Filters, Pall, FilterMart. Contact VerifiedFilters for specific part numbers and availability.

What is the collapse pressure rating of the Hy-Pro HP319L8-12EV?

The Hy-Pro HP319L8-12EV has a collapse pressure rating of 150 PSID. This indicates the maximum differential pressure the element can withstand without structural failure.

What is the operating temperature range for the Hy-Pro HP319L8-12EV?

The Hy-Pro HP319L8-12EV is rated for -20°F to 250°F, determined by its Viton (FKM) seals.

Request a quote for the Hy-Pro HP319L8-12EV

Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.

Verified Cross-References

520,000+ verified cross-references on file

Fast Response

Quotes and answers within 24 hours

Expert Support

Real filtration specialists, not call centers