Hy-Pro
Hy-Pro HP319L13-1EV
HP319L series filter element
Hy-Pro HP319L13-1EV specifications
The Hy-Pro HP319L13-1EV is a 1µm nominal (β-rated, absolute 3µm) polyester filter element. It measures 3.125" OD x 1.65" ID x 14.08" long. Seals are Viton (FKM), rated for -20°F to 250°F. Collapse pressure rating is 150 PSID. 4 verified cross-references are available from aftermarket manufacturers. Specifications verified. Last reviewed: May 2026
Physical fit
- Outer Diameter (O.D.)
- 3.125"OEM-published
- Inner Diameter (I.D.)
- 1.65"OEM-published
- Overall Length
- 14.08"OEM-published
- Micron Rating
- 1µm nominal (β-rated, absolute 3µm)OEM-published
- Seal Material
- Viton (FKM)OEM-published
- Connection / Thread
- Not yet verified from an OEM source
Performance: Hy-Pro published values
These are Hy-Pro's own published numbers. Performance specs differ by brand and are never inherited across cross-references.
- Media Type
- Polyester
- Collapse Rating
- 150 PSID
- Operating Temperature
- -20°F to 250°F
- Series
- HP319L
About the Hy-Pro HP319L13-1EV
Hy-Pro HP319L13-1EV hydraulic filter element. Corrosion resistant steel end caps and center tube. Viton seals (-20°F to 250°F).
What replaces the Hy-Pro HP319L13-1EV?
4 published cross-references on file. Select to expand.
What replaces the Hy-Pro HP319L13-1EV?
4 published cross-references on file. Select to expand.
A cross-reference confirms dimensional fit and micron rating, not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.
Published cross-references
| Part Number | Manufacturer | Match |
|---|---|---|
| SF319-13-1UMV-SDM | Swift Filters | Sourced |
| UE319AZ13Z | Pall | Verified |
| SBFUE319-13Z1V | Schroeder | Verified |
| 05-2466 | FilterMart | Sourced |
Application & Compatibility
The HY-PRO HP319L13-1EV is designed for use in hydraulic and lubrication filtration systems. With a 1µm nominal (β-rated, absolute 3µm) rating, this element is suitable for proportional valve protection and general hydraulic systems. Viton (FKM) seals provide compatibility with petroleum-based fluids, synthetic fluids, phosphate esters, and water-glycol mixtures.
The 150 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.
Frequently Asked Questions
What micron rating is the Hy-Pro HP319L13-1EV?
What are the dimensions of the Hy-Pro HP319L13-1EV?
What seal material does the Hy-Pro HP319L13-1EV use?
Is there a cross-reference for the Hy-Pro HP319L13-1EV?
What is the collapse pressure rating of the Hy-Pro HP319L13-1EV?
What is the operating temperature range for the Hy-Pro HP319L13-1EV?
How this entry is verified
Every specification on this page names its source: manufacturer documents first, distributor catalogs second, decoded part-number patterns labeled as such. When a value has not been verified from an OEM source, the cell says so. Cross-references are fit claims, never performance claims.
Request a quote for the Hy-Pro HP319L13-1EV
Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.
Verified Cross-References
520,000+ verified cross-references on file
Fast Response
Quotes and answers within 24 hours
Expert Support
Real filtration specialists, not call centers