Hy-Pro

Hy-Pro HP315L40-60EV

Verified Source

Dimensional schematic

Micron: 60µm
Media: Polyester
O.D.: 3.125"
I.D.: 1.65"
Length: 40"
Seal: Viton (FKM)
Collapse: 150 PSID

Hy-Pro HP315L40-60EV hydraulic filter element. Corrosion resistant steel end caps and center tube. Viton seals (-20°F to 250°F).

Request a quote

Pricing and availability within 24 hours.

Mon–Fri, 8am–5pm MT

Part Number: HP315L40-60EV
Manufacturer: Hy-Pro

Hy-Pro HP315L40-60EV specifications

The Hy-Pro HP315L40-60EV is a 60µm polyester filter element. It measures 3.125" OD x 1.65" ID x 40" long. Seals are Viton (FKM), rated for -20°F to 250°F. Collapse pressure rating is 150 PSID. Specifications verified. Last reviewed: May 2026

Performance

Media Type: Polyester
Collapse Rating: 150 PSID
Micron Rating: 60µm
Operating Temperature: -20°F to 250°F
Series: HP315L

Dimensions

O.A.L. (inches): 40"
O.D. (inches): 3.125"
I.D. (inches): 1.65"
Seal Material: Viton (FKM)

Application & Compatibility

The HY-PRO HP315L40-60EV is designed for use in hydraulic and lubrication filtration systems. With a 60µm rating, this element is suitable for pump and component protection in industrial hydraulic circuits. Viton (FKM) seals provide compatibility with petroleum-based fluids, synthetic fluids, phosphate esters, and water-glycol mixtures.

The 150 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.

Frequently Asked Questions

What micron rating is the Hy-Pro HP315L40-60EV?

The Hy-Pro HP315L40-60EV has a 60µm micron rating with polyester filter media.

What are the dimensions of the Hy-Pro HP315L40-60EV?

The Hy-Pro HP315L40-60EV measures 3.125" OD, 1.65" ID, 40" overall length.

What seal material does the Hy-Pro HP315L40-60EV use?

The Hy-Pro HP315L40-60EV uses Viton (FKM) seals, rated for -20°F to 250°F.

What is the collapse pressure rating of the Hy-Pro HP315L40-60EV?

The Hy-Pro HP315L40-60EV has a collapse pressure rating of 150 PSID. This indicates the maximum differential pressure the element can withstand without structural failure.

What is the operating temperature range for the Hy-Pro HP315L40-60EV?

The Hy-Pro HP315L40-60EV is rated for -20°F to 250°F, determined by its Viton (FKM) seals.

Request a quote for the Hy-Pro HP315L40-60EV

Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.

Verified Cross-References

520,000+ verified cross-references on file

Fast Response

Quotes and answers within 24 hours

Expert Support

Real filtration specialists, not call centers