Hy-Pro

Hy-Pro HP299L4-6EB

Verified Source

Dimensional schematic

Micron: 6µm
Media: Polyester
O.D.: 2.12"
I.D.: 0.994"
Length: 4.41"
Seal: Nitrile (Buna-N)
Collapse: 150 PSID

Hy-Pro HP299L4-6EB hydraulic filter element. Corrosion resistant steel end caps and center tube. Nitrile seals (-45°F to 225°F).

Request a quote

Pricing and availability within 24 hours.

Mon–Fri, 8am–5pm MT

1 verified cross-reference — see what replaces this →

Part Number: HP299L4-6EB
Manufacturer: Hy-Pro

Hy-Pro HP299L4-6EB specifications

The Hy-Pro HP299L4-6EB is a 6µm polyester filter element. It measures 2.12" OD x 0.994" ID x 4.41" long. Seals are Nitrile (Buna-N), rated for -45°F to 225°F. Collapse pressure rating is 150 PSID. 1 verified cross-reference is available from aftermarket manufacturers. Specifications verified. Last reviewed: May 2026

Performance

Micron Rating: 6µm
Media Type: Polyester
Collapse Rating: 150 PSID
Operating Temperature: -45°F to 225°F
Series: HP299L

Dimensions

O.D. (inches): 2.12"
I.D. (inches): 0.994"
O.A.L. (inches): 4.41"
Seal Material: Nitrile (Buna-N)

What replaces the Hy-Pro HP299L4-6EB?

1 verified cross-reference on file. A cross-reference confirms dimensional fit and micron rating — not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.

Part Number	Manufacturer	Match
05-3107	FilterMart	Sourced

Get a quote on any of these →

Application & Compatibility

The HY-PRO HP299L4-6EB is designed for use in hydraulic and lubrication filtration systems. With a 6µm rating, this element is suitable for proportional valve protection and general hydraulic systems. Nitrile (Buna-N) seals provide compatibility with standard petroleum-based fluids and mineral oils.

The 150 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.

Frequently Asked Questions

What micron rating is the Hy-Pro HP299L4-6EB?

The Hy-Pro HP299L4-6EB has a 6µm micron rating with polyester filter media.

What are the dimensions of the Hy-Pro HP299L4-6EB?

The Hy-Pro HP299L4-6EB measures 2.12" OD, 0.994" ID, 4.41" overall length.

What seal material does the Hy-Pro HP299L4-6EB use?

The Hy-Pro HP299L4-6EB uses Nitrile (Buna-N) seals, rated for -45°F to 225°F.

Is there a cross-reference for the Hy-Pro HP299L4-6EB?

Yes. There is 1 verified cross-reference for the Hy-Pro HP299L4-6EB from manufacturers including FilterMart. Contact VerifiedFilters for specific part numbers and availability.

What is the collapse pressure rating of the Hy-Pro HP299L4-6EB?

The Hy-Pro HP299L4-6EB has a collapse pressure rating of 150 PSID. This indicates the maximum differential pressure the element can withstand without structural failure.

What is the operating temperature range for the Hy-Pro HP299L4-6EB?

The Hy-Pro HP299L4-6EB is rated for -45°F to 225°F, determined by its Nitrile (Buna-N) seals.

Request a quote for the Hy-Pro HP299L4-6EB

Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.

Verified Cross-References

520,000+ verified cross-references on file

Fast Response

Quotes and answers within 24 hours

Expert Support

Real filtration specialists, not call centers