Hy-Pro

Hy-Pro HP28NL9-60WE

Verified SourceAbsolute Rated

Dimensional schematic

Micron: 60µm
Media: Stainless Steel Wire Mesh
O.D.: 2.36"
I.D.: 1.39"
Length: 9"
Seal: EPR (Ethylene Propylene)
Efficiency: β200
Collapse: 450 PSID

Hy-Pro HP28NL9-60WE is a filter element rated at 60 µm (60 µm nominal), a beta ratio of β ≥ 200, 450 psid collapse pressure, and measuring 2.36 in OD, 1.39 in ID, and 9 in length. It uses Stainless Steel Wire Mesh media and EPR (Ethylene Propylene) seals, rated for -65 °F to 300 °F (Hy-Pro datasheet/unknown drawing).

Request a quote

Pricing and availability within 24 hours.

Mon–Fri, 8am–5pm MT

2 verified cross-references — see what replaces this →

Part Number: HP28NL9-60WE
Manufacturer: Hy-Pro

Hy-Pro HP28NL9-60WE specifications

The Hy-Pro HP28NL9-60WE is a 60µm stainless steel wire mesh filter element. It measures 2.36" OD x 1.39" ID x 9" long. Filtration efficiency is rated at β200 per ISO 16889. Seals are EPR (Ethylene Propylene), rated for -65°F to 300°F. Collapse pressure rating is 450 PSID. 2 verified cross-references are available from aftermarket manufacturers. Specifications verified. Last reviewed: May 2026

Performance

Media Type: Stainless Steel Wire Mesh
Efficiency (ISO 16889): β200
Micron Rating: 60µm
Collapse Rating: 450 PSID
Operating Temperature: -65°F to 300°F
Series: HP28NL

Dimensions

O.D. (inches): 2.36"
I.D. (inches): 1.39"
O.A.L. (inches): 9"
Seal Material: EPR (Ethylene Propylene)

What replaces the Hy-Pro HP28NL9-60WE?

2 verified cross-references on file. A cross-reference confirms dimensional fit and micron rating — not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.

Part Number	Manufacturer	Match
SF28DN-9-60UWE	Swift Filters	Sourced
2.0018G60-A00-0-E	EPE	Verified

Get a quote on any of these →

Application & Compatibility

The HY-PRO HP28NL9-60WE is designed for use in hydraulic and lubrication filtration systems. With a 60µm rating, this element is suitable for pump and component protection in industrial hydraulic circuits. EPR (Ethylene Propylene) seals provide compatibility with standard petroleum-based fluids and mineral oils.

The 450 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.

Frequently Asked Questions

What micron rating is the Hy-Pro HP28NL9-60WE?

The Hy-Pro HP28NL9-60WE has a 60µm micron rating with stainless steel wire mesh filter media, rated at β200 per ISO 16889.

What are the dimensions of the Hy-Pro HP28NL9-60WE?

The Hy-Pro HP28NL9-60WE measures 2.36" OD, 1.39" ID, 9" overall length.

What seal material does the Hy-Pro HP28NL9-60WE use?

The Hy-Pro HP28NL9-60WE uses EPR (Ethylene Propylene) seals, rated for -65°F to 300°F.

Is there a cross-reference for the Hy-Pro HP28NL9-60WE?

Yes. There are 2 verified cross-references for the Hy-Pro HP28NL9-60WE from manufacturers including Swift Filters, EPE. Contact VerifiedFilters for specific part numbers and availability.

What is the collapse pressure rating of the Hy-Pro HP28NL9-60WE?

The Hy-Pro HP28NL9-60WE has a collapse pressure rating of 450 PSID. This indicates the maximum differential pressure the element can withstand without structural failure.

What is the operating temperature range for the Hy-Pro HP28NL9-60WE?

The Hy-Pro HP28NL9-60WE is rated for -65°F to 300°F, determined by its EPR (Ethylene Propylene) seals.

Request a quote for the Hy-Pro HP28NL9-60WE

Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.

Verified Cross-References

520,000+ verified cross-references on file

Fast Response

Quotes and answers within 24 hours

Expert Support

Real filtration specialists, not call centers