Hy-Pro

Hy-Pro HP28NL7-500WB

Verified SourceAbsolute Rated

Dimensional schematic

Micron: 500µm
Media: wire mesh
O.D.: 2.36"
I.D.: 1.39"
Length: 6.91"
Seal: Nitrile (Buna-N)
Efficiency: β200
Collapse: 450 PSID

Hy-Pro HP28NL7-500WB is a filter element rated at 500 µm (500 µm nominal), a beta ratio of β ≥ 200, 450 psid collapse pressure, and measuring 2.36 in OD, 1.39 in ID, and 6.91 in length. It uses wire mesh media and Nitrile (Buna-N) seals, rated for -45 °F to 225 °F (Hy-Pro datasheet/unknown drawing).

Request a quote

Pricing and availability within 24 hours.

Mon–Fri, 8am–5pm MT

3 verified cross-references — see what replaces this →

Part Number: HP28NL7-500WB
Manufacturer: Hy-Pro

Hy-Pro HP28NL7-500WB specifications

The Hy-Pro HP28NL7-500WB is a 500µm wire mesh filter element. It measures 2.36" OD x 1.39" ID x 6.91" long. Filtration efficiency is rated at β200 per ISO 16889. Seals are Nitrile (Buna-N), rated for -45°F to 225°F. Collapse pressure rating is 450 PSID. 3 verified cross-references are available from aftermarket manufacturers. Specifications verified. Last reviewed: May 2026

Performance

Media Type: wire mesh
Efficiency (ISO 16889): β200
Micron Rating: 500µm
Collapse Rating: 450 PSID
Operating Temperature: -45°F to 225°F
Series: HP28NL

Dimensions

O.D. (inches): 2.36"
I.D. (inches): 1.39"
O.A.L. (inches): 6.91"
Seal Material: Nitrile (Buna-N)

What replaces the Hy-Pro HP28NL7-500WB?

3 verified cross-references on file. A cross-reference confirms dimensional fit and micron rating — not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.

Part Number	Manufacturer	Match
R928039137	Rexroth	Verified
2.0015G500-A00-0-M	EPE	Verified
R928045650	Rexroth	Verified

Get a quote on any of these →

Application & Compatibility

The HY-PRO HP28NL7-500WB is designed for use in hydraulic and lubrication filtration systems. With a 500µm rating, this element is suitable for pump and component protection in industrial hydraulic circuits. Nitrile (Buna-N) seals provide compatibility with standard petroleum-based fluids and mineral oils.

The 450 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.

Frequently Asked Questions

What micron rating is the Hy-Pro HP28NL7-500WB?

The Hy-Pro HP28NL7-500WB has a 500µm micron rating with wire mesh filter media, rated at β200 per ISO 16889.

What are the dimensions of the Hy-Pro HP28NL7-500WB?

The Hy-Pro HP28NL7-500WB measures 2.36" OD, 1.39" ID, 6.91" overall length.

What seal material does the Hy-Pro HP28NL7-500WB use?

The Hy-Pro HP28NL7-500WB uses Nitrile (Buna-N) seals, rated for -45°F to 225°F.

Is there a cross-reference for the Hy-Pro HP28NL7-500WB?

Yes. There are 3 verified cross-references for the Hy-Pro HP28NL7-500WB from manufacturers including Rexroth, EPE. Contact VerifiedFilters for specific part numbers and availability.

What is the collapse pressure rating of the Hy-Pro HP28NL7-500WB?

The Hy-Pro HP28NL7-500WB has a collapse pressure rating of 450 PSID. This indicates the maximum differential pressure the element can withstand without structural failure.

What is the operating temperature range for the Hy-Pro HP28NL7-500WB?

The Hy-Pro HP28NL7-500WB is rated for -45°F to 225°F, determined by its Nitrile (Buna-N) seals.

Request a quote for the Hy-Pro HP28NL7-500WB

Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.

Verified Cross-References

520,000+ verified cross-references on file

Fast Response

Quotes and answers within 24 hours

Expert Support

Real filtration specialists, not call centers