Hy-Pro

Hy-Pro HP266L5-74WB

Verified SourceAbsolute Rated

Dimensional schematic

Micron: 74µm
Media: SS Wire Mesh
O.D.: 2.353"
I.D.: 0.98"
Length: 5.3"
Seal: Nitrile (Buna-N)
Efficiency: β200
Collapse: 150 PSID

Hy-Pro HP266L5-74WB is a filter element rated at 74 µm (74 µm nominal), a beta ratio of β ≥ 200, 150 psid collapse pressure, and measuring 2.353 in OD, 0.98 in ID, and 5.3 in length. It uses SS Wire Mesh media and Nitrile (Buna-N) seals, rated for -45 °F to 225 °F (Hy-Pro 12N-020 drawing).

Request a quote

Pricing and availability within 24 hours.

Mon–Fri, 8am–5pm MT

1 verified cross-reference — see what replaces this →

Part Number: HP266L5-74WB
Manufacturer: Hy-Pro

Hy-Pro HP266L5-74WB specifications

The Hy-Pro HP266L5-74WB is a 74µm ss wire mesh filter element. It measures 2.353" OD x 0.98" ID x 5.3" long. Filtration efficiency is rated at β200 per ISO 16889. Seals are Nitrile (Buna-N), rated for -45°F to 225°F. Collapse pressure rating is 150 PSID. 1 verified cross-reference is available from aftermarket manufacturers. Specifications verified. Last reviewed: May 2026

Performance

Micron Rating: 74µm
Media Type: SS Wire MeshStainless steel wire mesh
Efficiency (ISO 16889): β200
Collapse Rating: 150 PSID
Operating Temperature: -45°F to 225°F
Series: HP266L

Dimensions

O.A.L. (inches): 5.3"
O.D. (inches): 2.353"
I.D. (inches): 0.98"
Seal Material: Nitrile (Buna-N)

What replaces the Hy-Pro HP266L5-74WB?

1 verified cross-reference on file. A cross-reference confirms dimensional fit and micron rating — not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.

Part Number	Manufacturer	Match
G04402	Parker	Verified

Get a quote on any of these →

Application & Compatibility

The HY-PRO HP266L5-74WB is designed for use in hydraulic and lubrication filtration systems. With a 74µm rating, this element is suitable for pump and component protection in industrial hydraulic circuits. Nitrile (Buna-N) seals provide compatibility with standard petroleum-based fluids and mineral oils.

The 150 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.

Frequently Asked Questions

What micron rating is the Hy-Pro HP266L5-74WB?

The Hy-Pro HP266L5-74WB has a 74µm micron rating with ss wire mesh filter media, rated at β200 per ISO 16889.

What are the dimensions of the Hy-Pro HP266L5-74WB?

The Hy-Pro HP266L5-74WB measures 2.353" OD, 0.98" ID, 5.3" overall length.

What seal material does the Hy-Pro HP266L5-74WB use?

The Hy-Pro HP266L5-74WB uses Nitrile (Buna-N) seals, rated for -45°F to 225°F.

Is there a cross-reference for the Hy-Pro HP266L5-74WB?

Yes. There is 1 verified cross-reference for the Hy-Pro HP266L5-74WB from manufacturers including Parker. Contact VerifiedFilters for specific part numbers and availability.

What is the collapse pressure rating of the Hy-Pro HP266L5-74WB?

The Hy-Pro HP266L5-74WB has a collapse pressure rating of 150 PSID. This indicates the maximum differential pressure the element can withstand without structural failure.

What is the operating temperature range for the Hy-Pro HP266L5-74WB?

The Hy-Pro HP266L5-74WB is rated for -45°F to 225°F, determined by its Nitrile (Buna-N) seals.

Request a quote for the Hy-Pro HP266L5-74WB

Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.

Verified Cross-References

520,000+ verified cross-references on file

Fast Response

Quotes and answers within 24 hours

Expert Support

Real filtration specialists, not call centers