Hy-Pro

Hy-Pro HP25L9-60PB

Verified Source

Dimensional schematic

Micron: 60µm
Media: synthetic
O.D.: 2.498"
I.D.: 1.21"
Length: 9.62"
Seal: Nitrile (Buna-N)
Efficiency: β1000
Collapse: 150 PSID

Hy-Pro HP25L9-60PB is a filter element rated at 60 µm (60 µm nominal), a beta ratio of β ≥ 1000, 150 psid collapse pressure, and measuring 2.498 in OD, 1.21 in ID, and 9.62 in length. It uses synthetic media and Nitrile (Buna-N) seals, rated for -45 °F to 225 °F (Hy-Pro part number decoder).

Request a quote

Pricing and availability within 24 hours.

Mon–Fri, 8am–5pm MT

1 verified cross-reference — see what replaces this →

Part Number: HP25L9-60PB
Manufacturer: Hy-Pro

Hy-Pro HP25L9-60PB specifications

The Hy-Pro HP25L9-60PB is a 60µm synthetic filter element. It measures 2.498" OD x 1.21" ID x 9.62" long. Filtration efficiency is rated at β1000 per ISO 16889. Seals are Nitrile (Buna-N), rated for -45°F to 225°F. Collapse pressure rating is 150 PSID. 1 verified cross-reference is available from aftermarket manufacturers. Specifications verified. Last reviewed: April 2026

Performance

Media Type: synthetic
Efficiency (ISO 16889): β1000
Micron Rating: 60µm
Collapse Rating: 150 PSID
Operating Temperature: -45°F to 225°F

Dimensions

O.D. (inches): 2.498"
O.A.L. (inches): 9.62"
I.D. (inches): 1.21"
Seal Material: Nitrile (Buna-N)

What replaces the Hy-Pro HP25L9-60PB?

1 verified cross-reference on file. A cross-reference confirms dimensional fit and micron rating — not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.

Part Number	Manufacturer	Match
PH310-20-C	Hilco	Verified

Get a quote on any of these →

Application & Compatibility

The HY-PRO HP25L9-60PB is designed for use in hydraulic and lubrication filtration systems. With a 60µm rating, this element is suitable for pump and component protection in industrial hydraulic circuits. Nitrile (Buna-N) seals provide compatibility with standard petroleum-based fluids and mineral oils.

The 150 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.

Frequently Asked Questions

What micron rating is the Hy-Pro HP25L9-60PB?

The Hy-Pro HP25L9-60PB has a 60µm micron rating with synthetic filter media, rated at β1000 per ISO 16889.

What are the dimensions of the Hy-Pro HP25L9-60PB?

The Hy-Pro HP25L9-60PB measures 2.498" OD, 1.21" ID, 9.62" overall length.

What seal material does the Hy-Pro HP25L9-60PB use?

The Hy-Pro HP25L9-60PB uses Nitrile (Buna-N) seals, rated for -45°F to 225°F.

Is there a cross-reference for the Hy-Pro HP25L9-60PB?

Yes. There is 1 verified cross-reference for the Hy-Pro HP25L9-60PB from manufacturers including Hilco. Contact VerifiedFilters for specific part numbers and availability.

What is the collapse pressure rating of the Hy-Pro HP25L9-60PB?

The Hy-Pro HP25L9-60PB has a collapse pressure rating of 150 PSID. This indicates the maximum differential pressure the element can withstand without structural failure.

What is the operating temperature range for the Hy-Pro HP25L9-60PB?

The Hy-Pro HP25L9-60PB is rated for -45°F to 225°F, determined by its Nitrile (Buna-N) seals.

Request a quote for the Hy-Pro HP25L9-60PB

Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.

Verified Cross-References

520,000+ verified cross-references on file

Fast Response

Quotes and answers within 24 hours

Expert Support

Real filtration specialists, not call centers