Hy-Pro

Hy-Pro HP24HL3-100WV

Verified SourceAbsolute Rated

Dimensional schematic

Micron: 100µm
Media: Stainless Steel Wire Mesh
O.D.: 1.735"
I.D.: 0.73"
Length: 3.18"
Seal: Fluorocarbon (Viton)
Efficiency: β200
Collapse: 3000 PSID

Hy-Pro HP24HL3-100WV is a filter element rated at 100 µm (100 µm nominal), a beta ratio of β ≥ 200, 3000 psid collapse pressure, and measuring 1.735 in OD, 0.73 in ID, and 3.18 in length. It uses Stainless Steel Wire Mesh media and Fluorocarbon (Viton) seals, rated for -20 °F to 400 °F (Hy-Pro HP24HL_-___ drawing).

Request a quote

Pricing and availability within 24 hours.

Mon–Fri, 8am–5pm MT

1 verified cross-reference — see what replaces this →

Part Number: HP24HL3-100WV
Manufacturer: Hy-Pro

Hy-Pro HP24HL3-100WV specifications

The Hy-Pro HP24HL3-100WV is a 100µm stainless steel wire mesh filter element. It measures 1.735" OD x 0.73" ID x 3.18" long. Filtration efficiency is rated at β200 per ISO 16889. Seals are Fluorocarbon (Viton), rated for -20°F to 400°F. Collapse pressure rating is 3000 PSID. 1 verified cross-reference is available from aftermarket manufacturers. Specifications verified. Last reviewed: May 2026

Performance

Media Type: Stainless Steel Wire Mesh
Efficiency (ISO 16889): β200
Micron Rating: 100µm
Collapse Rating: 3000 PSID
Operating Temperature: -20°F to 400°F
Series: HP24HL

Dimensions

O.D. (inches): 1.735"
I.D. (inches): 0.73"
O.A.L. (inches): 3.18"
Seal Material: Fluorocarbon (Viton)

What replaces the Hy-Pro HP24HL3-100WV?

1 verified cross-reference on file. A cross-reference confirms dimensional fit and micron rating — not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.

Part Number	Manufacturer	Match
2.32G100-B00-0-V	EPE	Verified

Get a quote on any of these →

Application & Compatibility

The HY-PRO HP24HL3-100WV is designed for use in hydraulic and lubrication filtration systems. With a 100µm rating, this element is suitable for pump and component protection in industrial hydraulic circuits. Fluorocarbon (Viton) seals provide compatibility with petroleum-based fluids, synthetic fluids, phosphate esters, and water-glycol mixtures.

The 3000 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.

Frequently Asked Questions

What micron rating is the Hy-Pro HP24HL3-100WV?

The Hy-Pro HP24HL3-100WV has a 100µm micron rating with stainless steel wire mesh filter media, rated at β200 per ISO 16889.

What are the dimensions of the Hy-Pro HP24HL3-100WV?

The Hy-Pro HP24HL3-100WV measures 1.735" OD, 0.73" ID, 3.18" overall length.

What seal material does the Hy-Pro HP24HL3-100WV use?

The Hy-Pro HP24HL3-100WV uses Fluorocarbon (Viton) seals, rated for -20°F to 400°F.

Is there a cross-reference for the Hy-Pro HP24HL3-100WV?

Yes. There is 1 verified cross-reference for the Hy-Pro HP24HL3-100WV from manufacturers including EPE. Contact VerifiedFilters for specific part numbers and availability.

What is the collapse pressure rating of the Hy-Pro HP24HL3-100WV?

The Hy-Pro HP24HL3-100WV has a collapse pressure rating of 3000 PSID. This indicates the maximum differential pressure the element can withstand without structural failure.

What is the operating temperature range for the Hy-Pro HP24HL3-100WV?

The Hy-Pro HP24HL3-100WV is rated for -20°F to 400°F, determined by its Fluorocarbon (Viton) seals.

Request a quote for the Hy-Pro HP24HL3-100WV

Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.

Verified Cross-References

520,000+ verified cross-references on file

Fast Response

Quotes and answers within 24 hours

Expert Support

Real filtration specialists, not call centers