Hy-Pro
Hy-Pro HP219L4-3EV
- Micron
- 3µm nominal (β-rated, absolute 4µm)
- Media
- Polyester
- O.D.
- 2.12"
- I.D.
- 1.116"
- Length
- 4.741"
- Seal
- Viton (FKM)
- Collapse
- 150 PSID
Hy-Pro HP219L4-3EV hydraulic filter element. Corrosion resistant steel end caps and center tube. Viton seals (-20°F to 250°F).
Request a quote
Pricing and availability within 24 hours.
Get a quote →Or call (385) 202-5628Mon–Fri, 8am–5pm MT
4 verified cross-references — see what replaces this →- Part Number
- HP219L4-3EV
- Manufacturer
- Hy-Pro
Hy-Pro HP219L4-3EV specifications
The Hy-Pro HP219L4-3EV is a 3µm nominal (β-rated, absolute 4µm) polyester filter element. It measures 2.12" OD x 1.116" ID x 4.741" long. Seals are Viton (FKM), rated for -20°F to 250°F. Collapse pressure rating is 150 PSID. 4 verified cross-references are available from aftermarket manufacturers. Specifications verified. Last reviewed: May 2026
Performance
- Series
- HP219L
- Max Operating Pressure
- 4000 psi (275 bar)
- Collapse Rating
- 150 PSID
- Micron Rating
- 3µm nominal (β-rated, absolute 4µm)
- Media Type
- Polyester
- Operating Temperature
- -20°F to 250°F
Dimensions
- Seal Material
- Viton (FKM)
- O.A.L. (inches)
- 4.741"
- O.D. (inches)
- 2.12"
- I.D. (inches)
- 1.116"
Additional
- Filter Type
- Cartridge Element
- Element Length
- 4" (102 mm)
- Max Temperature
- 225°F (107°C)
What replaces the Hy-Pro HP219L4-3EV?
4 verified cross-references on file. A cross-reference confirms dimensional fit and micron rating — not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.
| Part Number | Manufacturer | Match |
|---|---|---|
| SF219-4-3UMV-SDM | Swift Filters | Sourced |
| UE219AP04Z | Pall | Verified |
| 940400Q | Parker | Verified |
| 05-4513 | FilterMart | Sourced |
Application & Compatibility
The HY-PRO HP219L4-3EV is designed for use in hydraulic and lubrication filtration systems. With a 3µm nominal (β-rated, absolute 4µm) rating, this element is suitable for pump and component protection in industrial hydraulic circuits. Viton (FKM) seals provide compatibility with petroleum-based fluids, synthetic fluids, phosphate esters, and water-glycol mixtures.
The 150 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.
Frequently Asked Questions
What micron rating is the Hy-Pro HP219L4-3EV?
What are the dimensions of the Hy-Pro HP219L4-3EV?
What seal material does the Hy-Pro HP219L4-3EV use?
Is there a cross-reference for the Hy-Pro HP219L4-3EV?
What is the collapse pressure rating of the Hy-Pro HP219L4-3EV?
What is the operating temperature range for the Hy-Pro HP219L4-3EV?
Request a quote for the Hy-Pro HP219L4-3EV
Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.
Verified Cross-References
520,000+ verified cross-references on file
Fast Response
Quotes and answers within 24 hours
Expert Support
Real filtration specialists, not call centers