Hy-Pro
Hy-Pro HP20L4-450WB
- Micron
- 450µm
- Media
- Wire Mesh
- O.D.
- 1.75"
- I.D.
- 1.021"
- Length
- 4.387"
- Seal
- Nitrile (Buna)
- Efficiency
- β200
- Collapse
- 290 PSID
Hy-Pro HP20L4-450WB is a filter element rated at 450 µm (450 µm nominal), a beta ratio of β ≥ 200, 290 psid collapse pressure, and measuring 1.75 in OD, 1.021 in ID, and 4.39 in length. It uses Wire Mesh media and Nitrile (Buna) seals, rated for -45 °F to 225 °F (Hy-Pro part number decoder).
Request a quote
Pricing and availability within 24 hours.
Get a quote →Or call (385) 202-5628Mon–Fri, 8am–5pm MT
2 verified cross-references — see what replaces this →- Part Number
- HP20L4-450WB
- Manufacturer
- Hy-Pro
Hy-Pro HP20L4-450WB specifications
The Hy-Pro HP20L4-450WB is a 450µm wire mesh filter element. It measures 1.75" OD x 1.021" ID x 4.387" long. Filtration efficiency is rated at β200 per ISO 16889. Seals are Nitrile (Buna), rated for -45°F to 225°F. Collapse pressure rating is 290 PSID. 2 verified cross-references are available from aftermarket manufacturers. Specifications verified. Last reviewed: May 2026
Performance
- Series
- HP20L
- Max Operating Pressure
- 4000 psi (275 bar)
- Collapse Rating
- 290 PSID
- Media Type
- Wire MeshStainless steel wire mesh
- Efficiency (ISO 16889)
- β200
- Micron Rating
- 450µm
- Operating Temperature
- -45°F to 225°F
Dimensions
- Seal Material
- Nitrile (Buna)
- O.D. (inches)
- 1.75"
- I.D. (inches)
- 1.021"
- O.A.L. (inches)
- 4.387"
Additional
- Filter Type
- Cartridge Element
- Element Length
- 4" (102 mm)
- Max Temperature
- 225°F (107°C)
What replaces the Hy-Pro HP20L4-450WB?
2 verified cross-references on file. A cross-reference confirms dimensional fit and micron rating — not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.
| Part Number | Manufacturer | Match |
|---|---|---|
| SF9020-4-450UW | Swift Filters | Sourced |
| HC9020EOA4H | Pall | Verified |
Application & Compatibility
The HY-PRO HP20L4-450WB is designed for use in hydraulic and lubrication filtration systems. With a 450µm rating, this element is suitable for pump and component protection in industrial hydraulic circuits. Nitrile (Buna) seals provide compatibility with standard petroleum-based fluids and mineral oils.
The 290 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.
Frequently Asked Questions
What micron rating is the Hy-Pro HP20L4-450WB?
What are the dimensions of the Hy-Pro HP20L4-450WB?
What seal material does the Hy-Pro HP20L4-450WB use?
Is there a cross-reference for the Hy-Pro HP20L4-450WB?
What is the collapse pressure rating of the Hy-Pro HP20L4-450WB?
What is the operating temperature range for the Hy-Pro HP20L4-450WB?
Request a quote for the Hy-Pro HP20L4-450WB
Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.
Verified Cross-References
520,000+ verified cross-references on file
Fast Response
Quotes and answers within 24 hours
Expert Support
Real filtration specialists, not call centers