Hy-Pro
Hy-Pro HP16DNL8-25WSB
Industrial filter element
Hy-Pro HP16DNL8-25WSB specifications
The Hy-Pro HP16DNL8-25WSB is a 25µm ss wire mesh filter element. Filtration efficiency is rated at β200 per ISO 16889. Seals are Nitrile (Buna-N), rated for -45°F to 225°F. Collapse pressure rating is 450 PSID. 8 verified cross-references are available from aftermarket manufacturers.
Physical fit
- Outer Diameter (O.D.)
- Not yet verified from an OEM source
- Inner Diameter (I.D.)
- Not yet verified from an OEM source
- Overall Length
- Not yet verified from an OEM source
- Micron Rating
- 25µmInherited from cross-reference
- Seal Material
- Nitrile (Buna-N)Inherited from cross-reference
- Connection / Thread
- Not yet verified from an OEM source
Performance: Hy-Pro published values
These are Hy-Pro's own published numbers. Performance specs differ by brand and are never inherited across cross-references.
- Efficiency (ISO 16889)
- β200
- Media Type
- SS Wire MeshStainless steel wire mesh
- Collapse Rating
- 450 PSID
- Operating Temperature
- -45°F to 225°F
About the Hy-Pro HP16DNL8-25WSB
Hy-Pro HP16DNL8-25WSB is a filter element rated at 25 µm (25 µm nominal), a beta ratio of β ≥ 200, 450 psid collapse pressure, and measuring 2.37 in OD, 1.337 in ID, and 7.47 in length. It uses SS Wire Mesh media and Nitrile (Buna-N) seals, rated for -45 °F to 225 °F (Hy-Pro Engineering Drawing 17D-026 Rev M 4/20/2017 , HP16DNL-S variant, dimensional callouts).
What replaces the Hy-Pro HP16DNL8-25WSB?
8 published cross-references on file. Select to expand.
What replaces the Hy-Pro HP16DNL8-25WSB?
8 published cross-references on file. Select to expand.
A cross-reference confirms dimensional fit and micron rating, not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.
Published cross-references
| Part Number | Manufacturer | Match |
|---|---|---|
| SF160DN-7-25UW-MSB | Swift Filters | Sourced |
| 400HL240G25 | EPE | Verified |
| MP3418 | MP Filtri | Verified |
| 02.0240D.25G.30.E.P | Internormen | Verified |
| 300851 | Internormen | Verified |
| 300851-25G | Internormen | Verified |
| FDHD240B25B | Fram | Verified |
| 06-0104 | FilterMart | Sourced |
Application & Compatibility
The HY-PRO HP16DNL8-25WSB is designed for use in hydraulic and lubrication filtration systems. With a 25µm rating, this element is suitable for pump and component protection in industrial hydraulic circuits. Nitrile (Buna-N) seals provide compatibility with standard petroleum-based fluids and mineral oils.
The 450 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.
Frequently Asked Questions
What micron rating is the Hy-Pro HP16DNL8-25WSB?
What seal material does the Hy-Pro HP16DNL8-25WSB use?
Is there a cross-reference for the Hy-Pro HP16DNL8-25WSB?
What is the collapse pressure rating of the Hy-Pro HP16DNL8-25WSB?
What is the operating temperature range for the Hy-Pro HP16DNL8-25WSB?
How this entry is verified
Every specification on this page names its source: manufacturer documents first, distributor catalogs second, decoded part-number patterns labeled as such. When a value has not been verified from an OEM source, the cell says so. Cross-references are fit claims, never performance claims.
Request a quote for the Hy-Pro HP16DNL8-25WSB
Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.
Verified Cross-References
520,000+ verified cross-references on file
Fast Response
Quotes and answers within 24 hours
Expert Support
Real filtration specialists, not call centers