Hy-Pro
Hy-Pro HP140L20-100WB
HP140L series filter element
Hy-Pro HP140L20-100WB specifications
The Hy-Pro HP140L20-100WB is a 100µm wire mesh filter element. It measures 5.62" OD x 3.7" ID x 20.1" long. Filtration efficiency is rated at β200 per ISO 16889. Seals are Nitrile (Buna), rated for -45°F to 225°F. Collapse pressure rating is 450 PSID. 10 verified cross-references are available from aftermarket manufacturers. Specifications verified. Last reviewed: May 2026
Physical fit
- Outer Diameter (O.D.)
- 5.62"OEM-published
- Inner Diameter (I.D.)
- 3.7"OEM-published
- Overall Length
- 20.1"OEM-published
- Micron Rating
- 100µmOEM-published
- Seal Material
- Nitrile (Buna)OEM-published
- Connection / Thread
- Not yet verified from an OEM source
Performance: Hy-Pro published values
These are Hy-Pro's own published numbers. Performance specs differ by brand and are never inherited across cross-references.
- Efficiency (ISO 16889)
- β200
- Media Type
- Wire MeshStainless steel wire mesh
- Collapse Rating
- 450 PSID
- Operating Temperature
- -45°F to 225°F
- Series
- HP140L
About the Hy-Pro HP140L20-100WB
Hy-Pro HP140L20-100WB is a filter element rated at 100 µm (100 µm nominal), a beta ratio of β ≥ 200, 450 psid collapse pressure, and measuring 5.59 in OD, 3.7 in ID, and 20.1 in length. It uses Wire Mesh media and Nitrile (Buna) seals, rated for -45 °F to 225 °F (Hy-Pro 15H-031 drawing).
What replaces the Hy-Pro HP140L20-100WB?
10 published cross-references on file. Select to expand.
What replaces the Hy-Pro HP140L20-100WB?
10 published cross-references on file. Select to expand.
A cross-reference confirms dimensional fit and micron rating, not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.
Published cross-references
| Part Number | Manufacturer | Match |
|---|---|---|
| 1.1401G100P | EPE | Verified |
| 1.1401G100-A-00-0-P | EPE | Verified |
| RS370B100B | Stauff | Verified |
| FRVR11401B10B | Fram | Verified |
| FRVR11401B100B | Fram | Verified |
| 03.1.1401.100G.16.B.P | Internormen | Verified |
| 321591 | Internormen | Verified |
| 321591-100G | — | Verified |
| R928045162 | Rexroth | Verified |
| 1.1401G100-A00-0-M | EPE | Verified |
Application & Compatibility
The HY-PRO HP140L20-100WB is designed for use in hydraulic and lubrication filtration systems. With a 100µm rating, this element is suitable for pump and component protection in industrial hydraulic circuits. Nitrile (Buna) seals provide compatibility with standard petroleum-based fluids and mineral oils.
The 450 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.
Frequently Asked Questions
What micron rating is the Hy-Pro HP140L20-100WB?
What are the dimensions of the Hy-Pro HP140L20-100WB?
What seal material does the Hy-Pro HP140L20-100WB use?
Is there a cross-reference for the Hy-Pro HP140L20-100WB?
What is the collapse pressure rating of the Hy-Pro HP140L20-100WB?
What is the operating temperature range for the Hy-Pro HP140L20-100WB?
How this entry is verified
Every specification on this page names its source: manufacturer documents first, distributor catalogs second, decoded part-number patterns labeled as such. When a value has not been verified from an OEM source, the cell says so. Cross-references are fit claims, never performance claims.
Request a quote for the Hy-Pro HP140L20-100WB
Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.
Verified Cross-References
520,000+ verified cross-references on file
Fast Response
Quotes and answers within 24 hours
Expert Support
Real filtration specialists, not call centers