Hy-Pro
The Hy-Pro HP102L18-70PB is a 70µm synthetic hydraulic filter element. It measures 6.014" OD x 18" long. Seals are Nitrile (Buna-N), rated for -45°F to 225°F. Collapse pressure rating is 150 PSID. 5 verified cross-references are available from aftermarket manufacturers.
Request a Quote
Request a quote for this filter element.
5 Cross-References Available
See which OEM filters this product replaces.
Technical specifications for the Hy-Pro HP102L18-70PB filter element. Data sourced from manufacturer catalogs and verified against OEM documentation.
| Specification | Value |
|---|---|
| Micron Rating | 70µm |
| Media Type | synthetic |
| O.D. (inches) | 6.014" |
| O.A.L. (inches) | 18" |
| Collapse Rating | 150 PSID |
| Seal Material | Nitrile (Buna-N) |
| Operating Temperature | -45°F to 225°F |
Last verified: February 2026
5 verified cross-references available from Hilco. All cross-references are reviewed for dimensional and performance compatibility.
| Manufacturer | Part Number | Confidence |
|---|---|---|
| Hilco | Request part number | Verified |
| Hilco | Request part number | Verified |
| Hilco | Request part number | Verified |
| Hilco | Request part number | Verified |
| Hilco | Request part number | Verified |
Get specific part numbers for all 5 aftermarket cross-references
Free cross-reference report. Usually within 24 hours.
Last verified: February 2026
The HY-PRO HP102L18-70PB is designed for use in hydraulic and lubrication filtration systems. With a 70µm rating, this element is suitable for pump and component protection in industrial hydraulic circuits. Nitrile (Buna-N) seals provide compatibility with standard petroleum-based fluids and mineral oils.
The 150 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.
250,000+ verified filter specifications
Quotes and answers within 24 hours
Real filtration specialists, not call centers