Hy-Pro
Hy-Pro HP06DHL5-10WSB
HP06DHL series filter element
Hy-Pro HP06DHL5-10WSB specifications
The Hy-Pro HP06DHL5-10WSB is a 10µm ss wire mesh filter element. It measures 1.875" OD x 0.875" ID x 3.85" long. Filtration efficiency is rated at β200 per ISO 16889. Seals are Nitrile (Buna-N), rated for -45°F to 225°F. Collapse pressure rating is 3000 PSID. 10 verified cross-references are available from aftermarket manufacturers. Specifications verified. Last reviewed: May 2026
Physical fit
- Outer Diameter (O.D.)
- 1.875"OEM-published
- Inner Diameter (I.D.)
- 0.875"OEM-published
- Overall Length
- 3.85"OEM-published
- Micron Rating
- 10µmOEM-published
- Seal Material
- Nitrile (Buna-N)OEM-published
- Connection / Thread
- Not yet verified from an OEM source
Performance: Hy-Pro published values
These are Hy-Pro's own published numbers. Performance specs differ by brand and are never inherited across cross-references.
- Efficiency (ISO 16889)
- β200
- Media Type
- SS Wire MeshStainless steel wire mesh
- Collapse Rating
- 3000 PSID
- Operating Temperature
- -45°F to 225°F
- Series
- HP06DHL
About the Hy-Pro HP06DHL5-10WSB
Hy-Pro HP06DHL5-10WSB is a filter element rated at 10 µm (10 µm nominal), a beta ratio of β ≥ 200, 3000 psid collapse pressure, and measuring 1.875 in OD, 0.875 in ID, and 3.85 in length. It uses SS Wire Mesh media and Nitrile (Buna-N) seals, rated for -45 °F to 225 °F (Hy-Pro datasheet).
What replaces the Hy-Pro HP06DHL5-10WSB?
10 published cross-references on file. Select to expand.
What replaces the Hy-Pro HP06DHL5-10WSB?
10 published cross-references on file. Select to expand.
A cross-reference confirms dimensional fit and micron rating, not performance equivalence. Beta ratio, collapse rating, media, and service life can differ between brands.
Published cross-references
| Part Number | Manufacturer | Match |
|---|---|---|
| R928006652 | Rexroth | Verified |
| R928006661 | Rexroth | Verified |
| 2.0040G10-C00-0-M | EPE | Verified |
| R928008508 | Rexroth | Verified |
| 2.0040G10-BH0-0-M | EPE | Verified |
| R928008517 | Rexroth | Verified |
| 2.0040G10-CH0-0-M | EPE | Verified |
| 76371090 | Mahle | Verified |
| Pi83004DN | Mahle | Verified |
| Pi83004DNDRGVST10 | Mahle | Verified |
Application & Compatibility
The HY-PRO HP06DHL5-10WSB is designed for use in hydraulic and lubrication filtration systems. With a 10µm rating, this element is suitable for proportional valve protection and general hydraulic systems. Nitrile (Buna-N) seals provide compatibility with standard petroleum-based fluids and mineral oils.
The 3000 PSID collapse rating indicates the maximum differential pressure this element can withstand during cold starts or bypass conditions without structural failure. Ensure your system's maximum differential pressure does not exceed this rating.
Frequently Asked Questions
What micron rating is the Hy-Pro HP06DHL5-10WSB?
What are the dimensions of the Hy-Pro HP06DHL5-10WSB?
What seal material does the Hy-Pro HP06DHL5-10WSB use?
Is there a cross-reference for the Hy-Pro HP06DHL5-10WSB?
What is the collapse pressure rating of the Hy-Pro HP06DHL5-10WSB?
What is the operating temperature range for the Hy-Pro HP06DHL5-10WSB?
How this entry is verified
Every specification on this page names its source: manufacturer documents first, distributor catalogs second, decoded part-number patterns labeled as such. When a value has not been verified from an OEM source, the cell says so. Cross-references are fit claims, never performance claims.
Request a quote for the Hy-Pro HP06DHL5-10WSB
Tell us where to send it and we'll get you pricing and availability within 24 hours. Leave a number and we'll call you back within the hour.
Verified Cross-References
520,000+ verified cross-references on file
Fast Response
Quotes and answers within 24 hours
Expert Support
Real filtration specialists, not call centers